Reference: 489848
Bearing reinforced cage polyamide FAG 6204 C4 20X47X14mm for minarelli am6 and scooter, derbi, piaggio, 103 ...
Ideal for strengthening your lower minarelli engine with quality material.
Banner
Here is the set of 2 bearings + 2 spi crankshaft seals for mécaboite minarelli am6, marketed by BARIKIT under the brand NTN, this set has been specifically selected to agree perfectly on a configuration prepared with specific crankshaft in large bristles. pack therefore consists of 2 bearings C4 models of increased size (therefore for large silks, bearing different bearings from the origin) with riveted steel cage, Ø20mm X Ø47mm X 14mm thick and a set of 2 special spy viton racing seals for high speed.
The C4 bearings in addition to being specific Ø20mm, will allow an optimized resistance of your low engine, an additional reinforcement, a released engine brake allowing more fluid revs, attenuated vibrations ... and by consequence, performances felt! As a reminder, the original crankshafts are in small bristles (Ø17mm), the crankshafts in large bristles with diameter Ø20mm are; the BARIKIT BRK Competition, the BIDALOT Racing pro, some TOP PERFORMANCES TPR which have 2 large bristles and many other models ....
Characteristics:
-X2 bearings C4 diameter Ø20mm X 47mm X thickness 14mm
-X1 joint spy 24X35X7mm
-X1 joint spy 17X35X7mm
Reference: 489848
Ideal for strengthening your lower minarelli engine with quality material.
Reference: 515588
Ideal to strengthen your low engine minarelli am6 with quality material.
Reference: 151988
A high-end pack, ideal to accompany a well-prepared engine configuration (bearings) Ø17mm!
Reference: 80000400
Reinforced high-end bearing SKF by BIDALOT. Model 6204 size Ø20 X 47 X 14 mm.
Reference: P400010444001
Ideal to accompany and strengthen a crankshaft with bristles (bearing seats) of original size Ø17mm! C3 models reinforced polyamide cage with Viton spy joints.
Reference: 9924750
Pack of high quality TOP PERFORMANCES RACING reinforced bearings with oil seals for minarelli am6 engine.
Reference: 488824
A high-end pack, ideal to accompany a well-prepared engine configuration with large bristle crankshaft (bearing seats) Ø20mm!
Reference: 520845
Ideal for reinforcing your minarelli am6 low competition engine with quality material.
Reference: 4484
Ideal for a quality refurbishment on your low minarelli am6 engine.
Reference: 6611566E
Reinforced bearings that will support large configurations without any problem.Available in C3 or C4 set!
Reference: KCR-08
Ideal for refurbishing your low minarelli am6 engine. Very reinforced set of bearings C4 original sizes Ø17mm + Viton spy seals.
Reference: 478939
The must of bearings and spy joints for a solid and tight assembly.
Reference: 6616065E
C4 reinforced bearings, high precision competition!
Reference: 280.0044
POLINI EVOLUTION reinforced bearing.
Reference: 100014
Solid bearings with good quality spy joints, ideal for small and medium configurations.
Reference: KCR-29
A high-end pack, ideal to accompany a well-prepared engine configuration with crankshaft bristles original size (bearings) Ø17mm!