- There are no more items in your cart
- Shipping Free
- Total €0.00
Ideal to facilitate your pad changes, caliper maintenance, bleed your brake system. Here is the tool TUN 'R brake pistons or brake pads, ideal especially if the pistons are hard or seized! Simply place the double flat between the pads or the brake pistons to make it back easily without forcing by hand! A real quality tool worthy of a professional mechanical workshop and to avoid using tools unsuitable for these maintenance operations.
Strong and durable, machined in very good materials for efficient and trouble-free use.
Detailed characteristics:
-Size up to 48mm
-Thickness of dishes 2 and 6mm depending on the angle used
-Width of dishes 40mm
-Length of dishes 107mm
-Extremity of chamfered dishes for easy placement
Reference: 512312
Dummy bearing DOPPLER 6303 for blank assembly, preparation, metrology...
Quality tool with specific material for better handling & use.
Reference: 517628
Tie-down, transport straps with BLACKWAY buckle for motorcycle or other (set of 2)
Tie-down straps for transporting motorcycles or other.
Reference: 540023
Wrench for TNT Original spoke rims size from 1 to 6
A key that will facilitate the tension of your spokes on your rims.
Reference: 549795L
Box of 40 elongated TORX and BTR bits (alen) ACSUD Industry
A box of 40 elongated TORX and BTR bits (ideal for cylinder heads, etc.) allowing you to work quickly with suitable tools.
Reference: 5048
BUZZETTI clip pliers with 90 ° spout (to tighten, for deep holes)
Ideal for removing or replacing all your clips. Ideal for MBK 51 variators / clutches!
Reference: 4949
Tool for assembly / disassembly escapement spring or other Buzzetti
A useful tool for installation, simpler dismantling your springs are often too hard.
Reference: 211292
Retractor plastic tire TIP TOP
Handy accessory for installation & dismantling your tires.
Reference: 490300
Screwdriver finger magnet magnetic flexible CGN
A handy tool flexible to retrieve small pieces stuck!
Reference: 549795M
Box of 9 elongated BTR bits (alen) ACSUD Industry hexagonal of 4 to 17 mm
A box of 9 elongated BTR bits (ideal cylinder heads ...) allowing you to work quickly with adapted tools.
Reference: 504057
SUPER B torque wrench TB-TW50 4/5/6 NM torque
High quality torque wrench for small tightening of 4/5 and 6 NM of torque.
Reference: 827
P2R universal chain tool for cyclo & motorcycle chain
Ideal for mounting and dismounting your chain kit more easily.
Reference: 541050C
ACSUD Industry 3-in-1 T-wrench with 8, 10 and 12 mm sockets
Practical and effective tool for your mechanics sessions.
Reference: 541060
Set of taps and dies ACSUD Industry 110 pieces from M2 to M18
A real asset for your workshop, a box of taps ultra complete with dies, a total of not less than 110 pieces!
Reference: 541050
Box 4 flat ratchet keys TNT from 9mm to 27mm
Tools very well studied to be able to assemble and disassemble your 2 wheels with few tools. It should be known that the most used keys are 10, 13, 17 and 21. And thanks to this box only 4 keys are enough.
Reference: 517691
Tie-down strap, transport with BLACKWAY buckle for motorcycle (special handlebar)
Tie-down straps for transporting motorcycles or other. Special handlebar grip!