Reference: 35 5931B
Ø40 X 1,2mm semi-trapezoidal segment for G1 / G1 polygonal / G2 kit on Peugeot 103
Banner
Here is the segment Ø40X1mm chrome steel BIDALOT racing. This is the segment installed on forged pistons and installed on pro racing kits. You can also install it on replica kits without problems. Certainly much more expensive than the cast iron segment but above all more resistant to wear and more efficient.
Reference: 35 5931B
Reference: CM02009
Ideal in case of loss of compression or for refurbishing your 103.
Reference: 21107.16
PARMAKIT high-end segment to refurbish and increase your engine compression!
Reference: 193223
Ideal for the maintenance of your Ø40mm DOPPLER aluminum cylinder.
Reference: 679
Ideal in case of loss of compression for inexpensive and quality reassembly on your old PEUGEOT 103 model!
Reference: 11020640
Replacement segments for the high engine AIRSAL original type on PEUGEOT 103!
Reference: 070016/R
Good quality pre-grounded segment.
Reference: 511019
Ideal in the event of loss of compression for an inexpensive and quality reassembly on your PEUGEOT 103
Reference: 206.0122
POLINI reinforced segment for better strength.
Reference: 21101.16
Segment L required for SIMONINI kits, GILARDONI, GIRAUDO, PARMAKIT ... sizes to choose!
Reference: 206.0128
Top-of-the-range POLINI segment in domed hard chrome.
Reference: 11021740 - 11020940 - 11024640
Ideal in case of wear, loss of compression ... On your AIRSAL 50cc liquid cooling kit on PEUGEOT 103.
Reference: S.LI240002015
Replacement of 2 high-end Ø40mm segments including one in L.
Reference: 678
Ideal in the event of loss of compression for an inexpensive and quality reassembly.
Reference: 56202.16
If compression loss and maintaining your kit 50 PARMAKIT.