Reference: S.I5500008
Segment Ø50mm ITALKIT kit for aluminum, cast MHR Team Big Bore ... minarelli am6, Derbi scooter ...
End chromed spare steel segment ITALKIT piston am6, derbi, scooter ...
Banner
ITALKIT complete piston for kits MALOSSI MHR & POLINI diameter 50mm. Very high-end piston with specific surface treatment, design and advanced study. Equipped with side grease nipples and a special cut at the level of the skirt. We have of course the ribs A (49.95mm) / B (49.96mm) / C (49.97mm) and 50.25 & 50.50mm depending on the wear of your cylinder. Generally on these cylinders, the passage in B is advised to 8000 see 10 000 km Delivered with its axis diameter Ø12mm X 40mm, clips in reinforced C 1mm, segment steel 0.8mm chrome finish.
This piston applies to the following kits:
Kit 3113036 MHR big bore 77cc on minarelli horizontal liquid engine
Kit 3113030 MHR big bore 77cc on liquid PIAGGIO engine
Kit 3113221 MHR 80cc on DERBI euro 2 engine
Kit 3111985 MHR 80cc on DERBI euro 3 engine
Kit 3112609 MHR 80cc on minarelli am6 engine
Kit 3112386 MHR team 80cc on minarelli am6 engine
Kit 3112988 MHR team 80cc on DERBI euro 3 engine
Kit 3112376 MHR team 80cc on DERBI euro 2 engine
and other models ...
Some kits are basic bi segment, it is of course possible to pass in mono segment. This will increase the high speeds thanks to the greatly reduced friction.
Be careful not to forget to choose your side of wear & reaming before adding to the basket.
Reference: S.I5500008
End chromed spare steel segment ITALKIT piston am6, derbi, scooter ...
Reference: G-469-BZ
Piston BARIKIT sapphire blue kit Ø50mm for minarelli am6.
Reference: 3413047.A0
Excellent for refurbishing your MALOSSI kit. Piston to be changed every 8,000 to 10,000 km!
Reference: 992414A
Top of the range TOP PERFORMANCES RACING TPR replacement piston for minarelli am6.
Reference: PI.44.49A.V
Piston mono segment complete spare graphite, top model home VERTEX for high engine kit 80cc and 75 with normal race and normal rod on minarelli am6!
Reference: 06301150
A spare piston good to change every 7000 km.
Reference: 57840.02A
PARMAKIT piston, high-end mono segment for all 50mm diameter kits.
Reference: S410480308002
Ideal for the maintenance of your 70cc ATHENA RACING kit!
Reference: 06131448
A good quality piston, delivered complete for a refurbishment of your cylinder.
Reference: P-269-1SA
Full Replacement Piston for 75cc kit Ø48 mm aluminum BARIKIT on minarelli am6 and DERBI GPR 75cc.
Reference: G-520-BZ
Ideal for maintaining your high BRK special 45mm motor racing.
Reference: PI.63.490.M1
Piston very high quality VERTEX, arises on all the big kits TOP PERFORMANCES cast iron on engine MINARELLI AM6!
Reference: 06135850
A good quality piston, delivered complete for a refurbishment of your cylinder.
Reference: PI.63.490.M
Piston complete bi segment of high-end replacement for high engine am6 kit.
Reference: PI.44.480A.V
Piston mono segment complete spare graphite, top model home VERTEX for kit high 75 and 80cc with 90mm rod on am6.
Reference: P-366
Full spare piston kit 70cc cast iron on minarelli am6 BARIKIT.
Reference: PI.44.48A.V1
Replacement complete graphite single segment piston, top-of-the-range model from VERTEX for high engine kit 75 and 80cc am6.with 42mm or 44mm long stroke! Can also be mounted on kit with 44mm stroke on HONDA NSR 75cc!