Reference: 35 7259
Set of 2 segments chrome for kit MALOSSI aluminum 70cc Ø47mm
Ideal in case of loss of compression and to put your high engine to nine.
Banner
For more performance and solidity on vertical minarelli, one of the solutions is to put a kit with piston in axis of 12mm, of course you will need the crankshaft for axis of 12mm appropriate. The piston d.47mm 12mm MHR axis for the 70cc aluminum MHR kit with bar for vertical minarelli and the MALOSSI MHR replica kit only . This piston is also the replacement model for MALOSSI MHR REPLICA phase 1 Ø47mm kits on minarelli am6. Excellent quality, treated, 2 thin hard chrome domed segments… a must have for vertical, in addition, it has side grease nipples! Supplied with 12mm axle, piston ring and clips in G.
Select your lettering A / B / C / D according to the wear of your kit, the lower the letter, the lower the piston has a rating.
Example :
A for kit which has from 0 to 5000km
B for kit which has from 5000 to 9000km
VS…
D ...
Reference: 35 7259
Ideal in case of loss of compression and to put your high engine to nine.
Reference: 36 4450
Do not forget to change at each winding to prevent engine failure thereafter.
Reference: 2311783B
Piston pin with shaped clips "C", essential for refurbishment quality and reliable.
Reference: 06133348
Quality piston kit for your 70 AIRSAL.
Reference: P-542
Complete replacement piston for kit 80cc Ø50mm cast iron BARIKIT BIG BORE on minarelli am6.
Reference: 9915780
A TOP PERFORMANCES quality piston for the Top Rose and Maxikit 85cc cast iron kits.
Reference: 229.0591
A good quality piston and finish changing every 5,000 to 6,000 km maximum for peak performance.
Reference: PI.44.480A.V
Piston mono segment complete spare graphite, top model home VERTEX for kit high 75 and 80cc with 90mm rod on am6.
Reference: G-469-BZ
Piston BARIKIT sapphire blue kit Ø50mm for minarelli am6.
Reference: G-211-BZ
Perfect for refurbishing your BARIKIT kit. Piston to be changed every 8,000 to 10,000 km!
Reference: P-366
Full spare piston kit 70cc cast iron on minarelli am6 BARIKIT.
Reference: PI.63.490.M1
Piston very high quality VERTEX, arises on all the big kits TOP PERFORMANCES cast iron on engine MINARELLI AM6!
Reference: S4C05000003A
Complete ATHENA spare piston for kit 80cc Ø50mm ATHENA Aluminum.
Reference: 57840.02A
PARMAKIT piston, high-end mono segment for all 50mm diameter kits.
Reference: 3411695.A0
Complete high-end piston for MALOSSI 80cc Ø50mm kit on AM6 & DERBI.
Reference: PI.44.48A.V
Spare bi segment piston, VERTEX high end model for ITALKIT high engine kit with long stroke 44 or 42mm on minarelli am6 or HONDA NSR with 75cc long stroke 44mm.
Reference: S4C04760005A
Complete quality piston for the maintenance of your Athena 70cc high engine kit.
Reference: PT150
Complete replacement piston for your minarelli am6 high engine.
Reference: PI.44.52A.I
Excellent quality replacement piston for ITALKIT 84cc Ø52mm minarelli am6 kit.