Reference: 02 1157B
Intake pipe Ø 19X24 plunge between axes 45-50 PHBG 19.5 GILERA cb1 50
Intake pipe Ø 19X24 diving between axes 45-50 PHBG 19.5 a GILERA cb1 50
Banner
High end admission! POLINI Motori manifold / intake manifold that can be rotated 360 ° in 30mm diameter. The must to equip a pushed engine configuration, this piece has the best in terms of study of the Italian house and will offer a lot of performance thanks to its technicality.
-For DELLORTO PHBL carburetors, MIKUNI TM, VM, KEIHIN ... and other models 26, 28mm.
-Fixation of carburettor Ø30 to 34mm.
-Internal diameter 30mm.
-Tilt angle 58 °.
-Original 360 °.
A = Ø33mm
B = 30
C = 58 °
Mounts on the following scooters:
- APRILIA : SCARABEO 50 STREET 2T RESTYLING Piaggio - SR 50 R-FACTORY (Piaggio engine)
- DERBI : ATLANTIS 02-BULLET-CITY-TWO CHIC Piaggio - GP1 50 2001-2003 - GP1 EURO2-OPEN-RACE 2005
- GILERA : DNA 50 - EASY MOVING - ICE - RUNNER 50 - SP - POGGIALI - STALKER - STORM - TYPHOON 50 - TYPHOON X 50
- ITALJET : TORPEDO 50 word. Piaggio
- PIAGGIO : DIESIS - EXTREM - EXTREM LC - FLY 50 2T - FREE - LIBERTY 50 (ruote alte) - MC2-98 - NRG MC3 H2O - NRG DD Power - NRG-NTT-MC2 - QUARTZ - SFERA 50 - SFERA 50 RESTYLING - TYPHOON 50 - ZIP 50 AIR - ZIP 50 AIR mod.2000 - ZIP 50 FAST RIDER - ZIP 50 SP H2O - ZIP 50 SP H2O mod.2000
- VESPA : VESPA 50 ET2-LX - VESPA 50 S 2T
And other models ...
Reference: 02 1157B
Intake pipe Ø 19X24 diving between axes 45-50 PHBG 19.5 a GILERA cb1 50
Reference: 830939
For a refurbishment of your intake pipe with an original part!
Reference: 9930860
Upscale intake kit TPR, adjustable 360 ° specially designed to accompany a carburetor MIKUNI TM24 or carburetor of this size on Piaggio scooter.
Reference: 02 7528B
High-end model in aluminum and viton, diameter 26mm for the DELLORTO PHBL and MIKUNI TM with 30mm diameter fixing!
Reference: 215.0405
Racing intake pipe, flexible mounting for carburettor from 17.5 to 21mm.
Reference: CT00727
Quality intake pipe, flexible mounting for carburetor from 17.5 to 21mm.
Reference: 2014520
Top-of-the-range model in aluminum and viton, diameter 22mm for DELLORTO PHBG and POLINI CP from 15 to 21mm with fixing in Ø24 to 26mm.
Reference: 215.0423
High-end model in aluminum and rubber, swiveling 360 °. for carburettors from 15 to 21mm.
Reference: 215.0438
High quality POLINI intake pipe, ideal for laying a POLINI 19 to 24mm CP carburettor.
Reference: 277859
Ideal to accompany a carburetor in diameter 19 to 21mm. Supplied with wedge, collar and sleeve.
Reference: 215.0436
Ideal to support a big configuration motor with PWK carburettor from 24 to 30mm, diameter of fixing 35mm.
Reference: 082005
Quality intake pipe, flexible mounting for carburetor from 17.5 to 21mm.
Reference: 2014519
High-end model in aluminum and viton, diameter 22mm for DELLORTO PHBG and POLINI CP from 15 to 21mm special racing models with Ø28mm fixing
Reference: 215.0437
For engines prepared with 24 to 30mm PWK carburetor, 35mm mounting diameter in flexible mounting.
Reference: 9931720
TPR intake kit, swivel 360 ° flexible mounting specially designed to accompany a carburetor 28 or OKO carburetor of this size on Piaggio scooter engine.
Reference: 270228
For a refurbishment at a good price of your admission!