Reference: 020840399
Cylinder without cylinder head Ø40mm AIRSAL SPORT aluminum mono-segment DERBI euro 3 & 4
A fairly powerful kit in mono-segment, to accompany the AIRSAL cylinder head!
Banner
Here is the small high engine 50cc AIRSAL sport kit for DERBI euro 3 and 4 engine. Brand has a good reputation well known in the field, a very good quality / price ratio.
This model in diameter Ø39.9mm does not have (let's not hide it) extra ordinary performance compared to the original because the original cylinder is very good, in aluminum with booster exhaust and a stud cylinder head as well as better diagrams than on a cast iron am6 for example. It will certainly be more efficient because it has a very correct finish, work in the channels which are reviewed and corrected, a high compression cylinder head with incoming tapered chamber for good alignment, a bar exhaust ...
But above all, it is a good element to start afresh on a good basis. It is equipped with a single segment piston to allow more high speeds (reduction of friction). This piston also has side grease nipples. This high engine will therefore offer more performance especially at high speed, a good increase in power and top speed will be present!
We recommend to accompany this kit with at least : carburetion in 19 to 21mm with small preparation of the air box, racing exhaust, cold racing spark plug once properly adjusted, valve slats in 0.35mm.
The pack contains :
-Cylinder 5 transfers of admission and exhaust bar
-Piston Ø39,9mm mono segment end 1mm with side grease nipples
-Piston axis Ø12mm
-G piston clips
-Pack of full seal
-2 cylinder head fittings
- Cylinder head has incoming high compression chamber
-Notice
-Segment Ø39.9mm by 1mm
In addition to this, you need to know more about it.
As an option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: 020840399
A fairly powerful kit in mono-segment, to accompany the AIRSAL cylinder head!
Reference: 060840399
Good quality piston, to be changed every 7000km.
Reference: 040840399
A good quality cylinder head, to accompany your 50cc Ø39.9mm kits on your DERBI euro 3 and 4 engines.
Reference: 140840399
The pack attached to refurbish without leaking your 50cc airsal mono-segment kits on DERBI EURO 3 and 4.
Reference: 110840399
The replacement segment for your high 50cc single-segment AIRSAL SPORT engines on DERBI euro 3 and 4 engine!
Reference: 3112977
A high performance kit reserved for competition in 50cc, very worked diagrams with a very studied architecture!
Reference: 504642
The latest cry from DOPPLER , the high cast iron engine which brings a good performance gain on DERBI euro 3 and 4 while preserving the solidity and the legal displacement of 50cc.
Reference: 11000057
A super powerful kit, at the height of MALOSSI MHR TEAM 50cc and POLINI EVOLUTION 50cc see above!
Reference: 020840399
A fairly powerful kit in mono-segment, to accompany the AIRSAL cylinder head!
Reference: 558
A very good quality kit that will offer excellent solidity and all this at a low price!
Reference: 466945
A very good quality kit that will offer excellent strength and all this at a low price!
Reference: 11000188
A super powerful kit, clearly above all the other 50cc!!
Reference: P400105100008
Aluminum kit, large diagrams, mono-semgent, stud bolt, exhaust valve ... Suffice to say that we are very heavy !!!
Reference: 030312
One of the cheapest kits on the market. Ideal for repairing your euro 3 at a lower cost.
Reference: CIL-748
Solid and efficient, a cylinder / piston without cylinder head ideal to respect the 50cc displacement and to circulate every day 5 transfers, oval exhaust with ooster, dual piston segments ....
Reference: P400105100003
High quality high performance kit for DERBI euro 3 and 4.
Reference: 504638
The latest from DOPPLER, the high cast iron engine which brings a very good performance gain on DERBI euro 3 and 4 while preserving the strength and the legal displacement of 50cc.
Reference: 472591
Here is a kit much cheaper than the original but of excellent quality!
Reference: 031000L
A very good little cast iron kit with exhaust boosters for DERBI euro 3 and euro 4, legal displacement respected, increased performance and lower price!
Reference: 479510
A kit more powerful than the origin with a very good solidity.
Reference: 23168.00
One of the most powerful kits on the market in 50cc therefore approved on the road!