Reference: 15312710
Silencer, BIDALOT cartridge for SMR, MXR exhaust on 50cc motorcycle DERBI, AM6 ...
The replacement silencer for MXR and SMR exhausts on 50cc motorcycles!
Banner
Not homologated on the road, only reserved for competition.
Here is a very large exhaust! The new 2015 version is one of the best for very large configurations. This exhaust was originally created for the BIDALOT FACTORY RACING 2015 80/85cc packs, it will also work very hard on the maxi kits approaching the performance of the BIDALOT 80/85cc packs, especially the long races with large cylinder diagrams .
This exhaust is delivered complete, with all the necessary mounting for each machine, with a very neat mounting on silentbloc, the mounting brackets are all adjustable. Aesthetic level and noise is huge and indescribable, you have to test it to understand the BIDALOT racing magic. The pot being very thin (8/10), the resonance is at the top, the high revs too, you really have to put this exhaust on over-boosted and well-tuned engines.
Technically, this escapement is made as follows:
- AP04 steel sheet 8/10th mm thick, laser cut
- Unit rolling of each cone manually
- Unitary welding of the seam of each cone by TIG welding
- Installation of each cone and pointing by TIG welding
- Welding of the pot by oxy-acethylene
- Each solder is tapped, so as not to have a bead of solder inside the pot
Finally, this exhaust has fairly substantial and unusual dimensions, which really makes it an XXL model, suitable for larger displacements. As always, BIDALOT has worked on a large rev range, which ensures high torque from low revs, while maintaining outstanding performance ''at the top''.
These various artifices allow this pot to have an excellent power of acceleration, without however compromising the extension and the high revs! To conclude, the perfection of the exhaust for over-boosted minarelli am6 mécaboite engine has a name: BIDALOT RACING FACTORY.
This exhaust is already raging on meetings, competitions, runs, it is at the top at all levels, it will just be necessary to install it with the appropriate configuration and the necessary knowledge in terms of mechanics, engine settings... With a very large configuration this exhaust will be able to develop enormous torque, an inexplicable recovery and breathtaking high revs.
The finishes are of course also at the top with a matte varnish, very clean welds, each part is treated as it should be, the silencer is in titanium gray aluminum.
This model mounts on:
-All DERBI euro 2 or 3 engine with perimeter frame
-DERBI SM (super biker)
-DERBI enduro (cross)
-DERBI DRD
-DERBI X-TREM
-DERBI X-RACE
-DERBI GPR
-APRILIA RX, SX... DERBI engine
-APRILIA RS, RS4... DERBI engine
- GILERA SMT and others
And other models….
Reference: 15312710
The replacement silencer for MXR and SMR exhausts on 50cc motorcycles!
Reference: 3212668
A high-end exhaust, with extensive studies to have a powerful exhaust while remaining approved.
Reference: ESC-09
A muffler specially designed for long runs in order to have maximum performance at high engine tuned and low motor race 45mm. Finish and quality of high-end manufacturing!
Reference: 15000377
Version 2017 80 to 85cc, BIDALOT RACING FACTORY exhaust for DERBI SENDA, SM, ENDURO, X-TREM, GPR ...! Mounting on all cylinders: between axis fixing 48 to 50mm!
Reference: VCR-RD15192/RE
A homologated and powerful exhaust for the original engines, 50cc competition and 70cc entry-level.
Reference: ECHAP720VG
Approved a pot with a very good design, quality and with very good performance. Ideal for small kits 50cc or 70cc.
Reference: EC08
A very good competition exhaust, ideal for large engine configurations!
Reference: TUB820TB
One of the best pots for 80cc to 94cc, very known especially in the middle of the runs thanks to a light weight, amazing power, a racing look and increased strength.
Reference: 200.0412
Very good complete line passage high to the left for DERBI, GILERA, APRILIA ... SM and ENDURO.
Reference: TUB230TB
A very good approved pot that will give very good performance accompanied by a kit 50cc or origin.
Reference: ECHAP610VG
A very well worked pot with excellent finishes, ideal for small kits 50cc or 70cc. Gunmetal silent.
Reference: 479481
A superb art traveling for derbi sm and enduro.
Reference: VCR-RD25192-RE
An approved and efficient muffler for original engines, 50cc competition and 70cc entry level.
Reference: TUB807TB-94
A good quality pot with a top finish that will go very well with 50cc kits or even small 70cc kits. It is worked on the high and medium revs.
Reference: TUB810TB
A clean exhaust, well finished which will adapt the kit 50cc to 70cc way. The Special R2 for supermotard bike in am6 and engine derbi!
Reference: 34667HF + 34609HF
The famous pot GIANNELLI for DERBI SM, ENDURO, X-TREM, X-RACE ... All models except DRD PRO. High passage guauche, rolled welded, a powerful pot, melodious and high quality has the perfect finish.
Reference: ESC-03
A pot very well designed for the most torquey high engines. In addition it has a good finish and a very high manufacturing quality.