Reference: 209.0459
Pack complete seal for kit 80cc Ø50mm POLINI Evolution DERBI Euro 3 & 4
Ideal for the maintenance of your high engine POLINI EVOLUTION.
Price
€11.66
Shipping in 1-3 days
Shipping in 1-3 days
- There are no more items in your cart
- Shipping Free
- Total €0.00
-
Banner
Cylinder head for kit 80cc POLINI Evolution Ø50mm on mécaboite driving DERBI euro 3 & 4
211.0304
Ideal in case of crack, veiling, loss of compression of your high POLINI Evolution engine on DERBI EURO 3 and 4.
Description
POLINI cylinder head stud for evolution kit on mécaboite driving DERBI EURO 3 and EURO 4. Polished frustoconical chamber, diameter 50mm. High-end aluminum. 
Product Details
211.0304
1 Item
New product
You might also like
16 other products in the same category:
Reference: CUL-919
BARIKIT cylinder head for kit 88cc Ø50mm stroke 45mm on DERBI euro 3 & 4
A high compression cylinder head with stud for the 88cc kit 45mm stroke BARIKIT aluminum in Ø50mm. Ideal in the event of breakage, crack or just heat which will make that the cylinder head will not be flat any more thus a premature wear of the gaskets.
Price
€75.83
Shipping in 7 to 12 days depending on BARIKIT factory arrivals
Shipping in 7 to 12 days depending on BARIKIT factory arrivals
Reference: 9934280
Complete cylinder head Ø50mm for kit and pack 86cc TOP PERFORMANCES cast iron long race 44 on DERBI euro 3 & 4
Complete spare cylinder head (decomposable in two parts), special for the high engine in 44, 86cc race on Derbi euro 3 and 4.
Price
€40.83
Shipping in 8 to 15 days depending on factory arrivals TOP PERFORMANCES
Shipping in 8 to 15 days depending on factory arrivals TOP PERFORMANCES
Reference: CU.12.52.1
ITALKIT cylinder head cover for kit and pack 75cc, 80cc on DERBI euro 3 & 4
Ideal in case of breakage or veiling for a refurbishment of your high engine large displacement on DERBI euro 3 and 4.
Price
€41.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 38 9512
MALOSSI cylinder head stud for MHR TEAM, CROSS, REPLICA kit on horizontal minarelli scooter lc, mécaboite derbi, am6
A replacement stud with a high compression chamber of very good quality.
Price
€56.66
Attention, may require a delay of more than 20 days
Attention, may require a delay of more than 20 days
Reference: 23170.04
Complete stud cylinder head for 80cc Ø50mm aluminum PARMAKIT kit on DERBI euro 3 & 4
High-end replacement cylinder head, with high compression chamber stud.
Price
€90.83
Shipping in 5 to 10 days!
Shipping in 5 to 10 days!
Reference: CU.12.77.5
ITALKIT hemispherical Ø48mm cylinder head stud for racing pack and kit 75cc long race 42 on DERBI euro 3 & 4
Ideal in case of breakage or wear, high quality cylinder head stud, ITALKIT Competition model for the 75cc Ø48 mm pack and kit 42.00 mm long stroke on DERBI euro 3 and 4.
Price
€37.49
Shipping in 1-3 days
Shipping in 1-3 days
Reference: CU.12.90
Complete stud cylinder head for ITALKIT 70cc Ø47,6mm aluminum kit on DERBI euro 3 & 4
Complete replacement cylinder head (decomposable two parts), special for the high engine in normal stroke, diameter 47.6mm 70cc.
Price
€78.33
Attention, requires a period of more than 20 days!
Attention, requires a period of more than 20 days!
Reference: 11220870
BIDALOT cylinder head cover for RACING FACTORY kits on Minarelli am6 and DERBI euro 1, 2, 3 & 4
Ideal to give a racing look to your engine or wear!
Price
€94.16
Variable delay according to BIDALOT factory! May need more than 20 days!
Variable delay according to BIDALOT factory! May need more than 20 days!
Reference: 04087550
AIRSAL cylinder head for kit 88c Ø50mm AIRSAL Xtrem red (special 45mm stroke) DERBI euro 3 & 4
Replacement cylinder head for your 88cc kit!
Price
€28.33
Shipping in 20 to 90 days depending on factory arrivals.
Shipping in 20 to 90 days depending on factory arrivals.
Reference: 11210860
BIDALOT hemispherical Ø47,6mm cylinder head stud for RACING FACTORY kit on minarelli am6, DERBI euro 3 & 4
BIDALOT high quality cylinder head stud for Racing Factory kit on AM6 & DERBI Euro 3 and 4.
Price
€69.16
Variable delay according to BIDALOT factory! May need more than 20 days!
Variable delay according to BIDALOT factory! May need more than 20 days!
Reference: S410105308008
Cylinder head for kit 80cc ATHENA Racing Ø50mm on mécaboite driving DERBI euro 3 & 4
Replacement cylinder head stud for ATHENA Racing 80cc kit.
Price
€49.99
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 38 9513
Head cover for all kits MALOSSI MHR TEAM / CROSS and BIG BORE
For stud head only, covers aluminum cylinder head essential to replace your old piece out of use.
Price
€54.16
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 23180.04
Complete stud cylinder head for PARMAKIT 110cc Ø55mm aluminum kit on DERBI euro 3 & 4
Ideal in case of breakage or wear of your old cylinder head! Top-of-the-range model for 110cc PARMAKIT kit.
Price
€124.99
Shipping in 5 to 10 days!
Shipping in 5 to 10 days!
Reference: 04084350
AIRSAL cylinder head for 80cc Ø50mm Sport kit on DERBI euro 3 & 4
A single high compression cylinder head for the 80cc AIRSAL Sport aluminum kit in Ø50mm. Ideal in the event of breakage, crack or just heat which will make that the cylinder head will not be flat any more thus a premature wear of the gaskets.
Price
€28.33
Shipping in 20 to 90 days depending on factory arrivals.
Shipping in 20 to 90 days depending on factory arrivals.
Reference: 040810050
Ø50mm cylinder head for AIRSAL XTREM 80cc mono-segment kit on DERBI euro 3 & 4 engine
A single high compression cylinder head for the 80cc aluminum AIRSAL kit in Ø50mm. Ideal in the event of breakage, crack or just heat which will make that the cylinder head will not be flat any more thus a premature wear of the gaskets.
Price
€24.99
Shipping in 20 to 90 days depending on factory arrivals.
Shipping in 20 to 90 days depending on factory arrivals.
Reference: CU.12.90.5
ITALKIT Ø47,6mm cylinder head stud for 70cc ITALKIT kit on DERBI euro 3 & 4
Ideal in case of breakage or wear, high quality cylinder head stud, ITALKIT Competition model for 70 Ø47.6mm kit on DERBI euro 3 and 4.
Price
€35.83
Shipping in 1-3 days
Shipping in 1-3 days
Ideal in case of crack, veiling, loss of compression of your high POLINI Evolution engine on DERBI EURO 3 and 4.