Reference: 2947
Crown hub Ø98mm CHARVIN for GRIMECA Peugeot 103 rims, teeth of your choice width 415, 10 fixing holes
Courrone Made in France CHARVIN for your PEUGEOT 103 GRIMECA rims, from 40 to 60 teeth available with 10 fixing holes.
Banner
Here are the crowns with Ø94mm hub hole from FRANCE EQUIPEMENT by CHARVIN Industrie for Peugeot 103 with spoke wheels. With a wide choice of 40 to 60 teeth, you will be able to fine-tune your transmission settings. A large crown will allow you to get more acceleration (take into account also the variation / clutch part) while a smaller crown will give you a speed increase at the expense of acceleration / recovery!
It's up to you to find the right compromise according to your configuration. It is strongly recommended to change the chain and pinion to start on a new transmission without problems. A crown of excellent quality Made in France with a treated and machined steel alloy. An element intended to last in time, do not forget to grease your chain to avoid friction between sprocket / chain / crown (to reduce heating, wear, play, ...). Model 11 fixing holes in width 415.
Be careful to select the number of teeth before adding to the basket.
Reference: 2947
Courrone Made in France CHARVIN for your PEUGEOT 103 GRIMECA rims, from 40 to 60 teeth available with 10 fixing holes.
Reference: 244069
Courrone Made in France CHARVIN for your spoked PEUGEOT 103 rims, from 42 to 56 teeth available! Models with 11 fixing holes.
Reference: 2970
The CHARVIN Industries Made in France courrone for your MBK 51 S rims, from 42 to 60 teeth available with 10 fixing holes.
Reference: D420.30
Crown to be machined, in aluminium, available from 29 to 78 teeth! For 420 chain.
Reference: D525.30
Crown to be machined, in aluminium, available from 30 to 60 teeth! For 525 chain.
Reference: 1125.01010.39
Courrone Made in France by CHARVIN for your PEUGEOT 103 SPX, FUN spoked rims, from 39 to 60 teeth available! Models with 10 fixing holes.
Reference: 2940
Courrone Made in France CHARVIN for your PEUGEOT 103 rims with steel sticks, from 43 to 56 teeth available! Models with 10 fixing holes.
Reference: D530.30
Crown to be machined, in aluminium, available from 30 to 70 teeth! For 530 chain.
Reference: D520.31
Crown to be machined, in aluminium, available from 30 to 60 teeth! For 520 chain.
Reference: 2957
Courrone Made in France CHARVIN for your MBK 40 & 50 rims, 3 sizes available! Models with 10 fixing holes.
Reference: 512881
Crown that mounts on your DOPPLER or FRANCE EQUIPEMENT crown holder.
Reference: D415.20
Crown to be machined, in aluminium, available from 20 to 85 teeth! For 415 chain.
Reference: D428.30
Crown to be machined, in aluminium, available from 29 to 78 teeth! For 428 chain.
Reference: 2959
Crown Made in France CHARVIN for your MBK 41 & 51 rims, 3 sizes available! Models with 11 fixing holes in diameter 94mm.
Reference: 2931
CGN replacement crown at a lower price for your 103!
Reference: 2060.02017.44
Courrone Made in France FRANCE EQUIPEMENT for your MBK 41 & 51 rims, 3 sizes available! Models with 11 fixing holes in diameter 94mm.