Reference: 31071140
Crankshaft, connecting rod assembly AIRSAL Xtreme axis Ø10 / 12mm minarelli horizontal (nitro, aerox, ovetto, neos, ...)
A good reinforced crankshaft that mounts to virtually any configuration for an unbeatable price.
Banner
Competition crankshaft POLINI motori in full masses, this crankshaft is part of the must available on the market in full masses. With a good weight it offers excellent inertia, its fully solid masses and studied allow a good greasing crank as well as good performance. The materials used are the highest quality steels. The connecting rod is a very large model!
Reinforced, the crankpin and cages were increased. We will appreciate the lubrication of head and small end ultra studied! This crankshaft has an irreproachable finish, it is almost unbreakable and you can mount it on any kit even the most powerful! Finally a powerful crankshaft, ultra resistant, beautiful and for a reasonable price.
Delivered for kit with piston Ø12mm axis according to your choice (to select according to the kit that you want to put on the crankshaft, to know that the origin is always of diameter 10mm, all the TOP PERFORMANCES, DR ... Also! cast kits!
Summary :
Bielle size origin
Solid masses for maximum pre-compression
Dynamic balancing 15,500 revolutions / minute real performed for a maximum of inertia without vibrations
Reinforced to the maximum
Needle cage reinforced size 12mm according to your choice
Bristles: Ø20mm original size
Keying for ignition: original location
Race: origin
Increased crankpin 20% for more resistance
spare parts :
spare cage Ø12mm
complete connecting rod
Mounts on:
APRILIA AREA 51
APRILIA GULLIVER 50 / GULLIVER 50 LC
APRILIA RALLY 50 / RALLY 50 LC
APRILIA SCARABEO 50 2T
APRILIA SONIC 50 (CY) / SONIC 50 GP (CY)
APRILIA SR 50 LC STEALTH / RACING / NETSCAPER
APRILIA SR 50 mod.94-95-96 Air
APRILIA SR 50 mod.94-95-96 H2O
APRILIA SR 50 WWW
ATALA CAROSELLO
BENELLI 491 GT
BENELLI ST
BENELLI 491 RR
BENELLI RACING
BENELLI SP
BENELLI SPORT
BENELLI K2
BRNELLI K2 LIQUID COOLED
BENELLI NAKED 50
BENELLI PEPE
BENELLI LX (until 2004)
BETA ARK AIR
BETA ARK LC
BETA SERIE K
BETA EIKON 50
BETA QUADRA
BETA QUADRA CHRONO 502
BETA TEMPO
BSV AX
BSV JX
BSV GZ
GARELLI GSP 50 2T LC euro 2
ITALJET DRAGSTER LC
KTM K 50
MALAGUTI CENTRO SL
MALAGUTI CIAK
MALAGUTI F 10 (CY)
MALAGUTI F 12 DIGIT EURO 2 KAT (phase 1)
MALAGUTI F 12 PHANTOM 2000
MALAGUTI F 12 PHANTOM LC
MALAGUTI F 15 FIREFOX H2O -
MALAGUTI YESTERDAY
MBK EQUALIS
MBK EVOLIS
MBK FIZZ
MBK FORTE
MBK HOT FIELD
MBK MACH G
MBK NITRO H2O
MBK OVETTO 50
MBK SORRISO 96
MOTRON STING
MOTRON SYNCRO
MOTRON THUNDER
YAMAHA AEROX H2O 2004-2005
YAMAHA AXIS
YAMAHA BREEZE
YAMAHA JOG JOG Z
YAMAHA JOG R 50
YAMAHA NEO'S 50
YAMAHA VINO
YAMAHA WHY
YAMAHA YE 50 ZEST
And many other models ...
Reference: 31071140
A good reinforced crankshaft that mounts to virtually any configuration for an unbeatable price.
Reference: VI05
A very well balanced reinforced crankshaft that will support the largest configuration on the market.
Reference: 090802A
Ideal for a new start or strengthen your lower engine !!
Reference: VI06
A very well balanced reinforced crankshaft which bear the largest market configuration.
Reference: 210.0048
Very high quality POLINI reinforced crankshaft!
Reference: 090931A
A very good quality, solid and well balanced vilo, available in 10 or 12mm axis.
Reference: S410485320006
Original ATHENA type crankshaft for your APRILIA , BENELLI, BETA scooters... For Ø10mm piston pin!
Reference: 068014/1
A very well balanced reinforced crankshaft that will support 50cc and above configurations.
Reference: 19876
A reinforced crankshaft at a low price but very well balanced. Ideal for small kit 70cc or 50cc.
Reference: CIG-80R
Ideal for strengthening your lower engine and accompany a 50cc or 70cc horizontal configuration on your minarelli scooter.
Reference: IM07014
A linkage of excellent quality, superior to the origin. 10mm axle provided with needle cage.
Reference: 486141
A strong linkage in full masses, strengthened and very high quality with a low price! Ideal to accompany a configuration origin or slightly prepared on your motor scooter Minarelli Horizontal.
Reference: 248743
A reinforced vilo with a super low price for your motor scooter MINARELLI Horizontal!
Reference: 53 7891
A vilo MALOSSI MHR of very good quality, solid and well balanced, available in axis of 10 or 12mm.
Reference: 6030001
Crankshaft type origin for minarelli horizontal.
Reference: 53 8855
A very well balanced crankshaft reinforced MHR who bear the biggest market configuration. 85mm long connecting rod!