Reference: 57006.14
PARMAKIT Crankshaft race origin 57mm for Vespa ET3, PRIMAVERA 125, PK 80 and 125cc
Good quality reinforced crankshaft, ideal to put her down engine and accompany a new kit! Cone 19mm.
Banner
PARMAKIT reinforced crankshaft, cut in best steels and well assembled, the crankshaft has a 54mm long stroke to increase engine displacement, torque and power, 105mm long by connecting rod to reduce the sustained pressure and stress on the piston and connecting rod by reducing the working angle, you must use an 8mm shim under the cylinder if it is not suitable has a long rod of 105mm and 1.5mm and more if it is not suitable has a long 54mm stroke. In addition, the diameter of the mass is increased to 87mm for a better engine inertia, but also, the increase (also Appellees bristles) are Ø 20mm, it faudrat you use the appropriate bearings to seat diameter 20mm! Ideal with a motor home or a large kit! Good balance! Admission to a Model valves!
Itself on:
-VESPA 125cc ET3
-VESPA 125cc ETS
-VESPA 125cc PK
-VESPA 125cc PRIMAVERA
-VESPA 125cc XL
Reference: 57006.14
Good quality reinforced crankshaft, ideal to put her down engine and accompany a new kit! Cone 19mm.
Reference: 210.0034
The famous long race 52,8mm POLINI EVOLUTION with its solid masses, its bristles of 20mm and its machined rod! The best of the best! For admission to flaps only!
Reference: CIG-108
Original reinforced crankshaft for 100cc HONDA scooters from 1996.
Reference: 210.0062
Crankshaft of good quality reinforced, ideal to put his low engine to nine and accompany a kit! Super version above all levels!
Reference: 6030156
Good quality reinforced crankshaft, ideal to put her down engine and accompany a new kit!
Reference: 6030146
Excellent crankshaft TOP RACING High Quality PE and Vespa PX 200cc 2T!
Reference: 210.0070
The famous long stroke 54mm POLINI EVOLUTION with its solid masses, its 20mm bristles and its machined connecting rod! The top of the top! For intake valves only!
Reference: CIG-67
Reinforced crankshaft for 125/150 / 180cc 2T scooter engines PIAGGIO / GILERA / APRILIA ...
Reference: IM07067
Crankshaft of good quality reinforced, ideal to put his low engine to nine and accompany a kit!
Reference: 57090.14
W FORCE crankshaft normal race 87mm diameter for large masses more inertia, Ø 20mm scopes! Version 105mm long rod!
Reference: 45106000
Normal stroke crankshaft, masses large diameter 87mm for more inertia, Ø ranges in Ø19 or Ø20mm with the choices! For admission valves!
Reference: 57415.14
Good quality crankshaft reinforced with a 110mm long connecting rod, ideal for refurbishing its low engine and accompanying a kit!
Reference: RST.341
A special competition needle cage, silver treated from ITALKIT in Ø14X19X17mm.
Reference: 57417.14
Good quality reinforced crankshaft and connecting rod 110mm long race 60mm long, ideal to put her down engine and accompany a new kit!
Reference: 57080.14
W FORCE crankshaft normal race 87mm diameter for large masses more inertia, Ø 20mm scopes!
Reference: 6032147
Excellent high quality TOP RACING crankshaft for your VESPA PE and PX 200cc 2T! 60mm long stroke version!