Reference: CIG-132R
Crankshaft, connecting rod assembly BARIKIT BRK 4 RACE stroke 40.7mm for mécaboite driving DERBI euro 3 & 4
A high quality crankshaft, ideal for strengthening your low engine with a stroke very slightly increased by 40.7mm.
Banner
Here is the AIRSAL racing crankshaft. It came out to accompany the high red AIRSAL Xtrem engine for 45mm stroke on DERBI Euro 3 and 4. You can mount it with other cylinder without problems !.
It is of good quality, in full masses in order to offer more pre compression, the red masses prove the presence of a careful and worked balancing. It is equipped with a reinforced connecting rod with polished finish. The connecting rod rests on a reinforced increased cage, a crank pin with an increased diameter of Ø18mm as well as anti-friction shims.
Its balancing is not specifically made to accommodate the famous high engine Xtrem. Clearly, it is a very good long stroke crankshaft, not a performance monster far from the but a very good quality / price ratio.
Reference: CIG-132R
A high quality crankshaft, ideal for strengthening your low engine with a stroke very slightly increased by 40.7mm.
Reference: CIG-141R
Well reinforced with better balance and more strength than the normal BARIKIT model. This 45mm stroke is ideal for increasing your stroke, displacement, power, torque ....
Reference: 12100880
Competition crankshaft to reinforce the prepared engine of your DERBI euro 3 and 4.
Reference: CB.12.243.2
Special high-end 43mm long stroke connecting rod, 90mm machined forged connecting rod, ... with Ø12 mm silver treated needle cage Dynamic balancing designed to be assembled without balancer.
Reference: 12100982
A high-end crank assembly, special 48.00mm long stroke to accompany a BIDALOT FACTORY 94cc high engine with machining of the engine casings!
Reference: CB.12.245.2
Mazzuchelli top-of-the-range 44.90mm special long stroke crankshaft, forged connecting rod machined in the mass 90mm, ... with Ø12 mm silver treated needle cage Dynamic balancing designed to be assembled without balancer.
Reference: CB.12.243.1
Special high-end 43mm long stroke connecting rod, 90mm machined forged connecting rod, ... With Ø12 mm silver treated needle cage Dynamic balancing designed to be assembled with a balancer.
Reference: CIG-85R
Well reinforced with better balance and more strength than the normal BARIKIT model. This 43mm stroke is ideal for increasing your stroke, displacement, power, torque .... With a 1.5mm shim.
Reference: 23180.14
A crankshaft designed for the famous 110cc kit from PARMAKIT. But easily mounts on other engine. Be careful, however, not to have too high diagrams.
Reference: VI32
Special long run 44.8mm high-end, forged and polished steel rod 90mm, ... With needle cage Ø12 or 13mm. Balance made to decrease vibrations.
Reference: CB.12.95
Special crankshaft 42.00mm long stroke, 90mm forged connecting rod, ... with silver treated needle cage. Ideal for increasing its displacement and strengthening its low engine as it should.
Reference: CB.12.245.1
Mazzuchelli top-of-the-range 44.90mm long stroke special crankshaft, forged connecting rod machined in the mass 90mm, ... with Ø12 mm silver treated needle cage Dynamic balancing designed to be assembled with a balancer.
Reference: VI31
Special long run 44.8mm high-end, forged and polished steel rod 90mm, ... With needle cage Ø12 or 13mm X17. Balance made to decrease vibrations.
Reference: 9930210
Special high-end 44mm long stroke connecting rod, 90mm machined forged connecting rod, ... With Ø12 mm silver treated needle cage Dynamic balancing designed to be assembled with a balancer.