Reference: 508296
Cylinder base block DOPPLER thickness 1mm for DERBI euro 1 & 2
Ideal for raising your diagrams or for fitting a 42mm long stroke crankshaft on DERBI euro 1 and 2 engine. Digitally machined aluminum wedge.
Banner
FAG competition bearing, celeron cage, manufactured by FAG. Model 6204 TB-P6. Size 20X47X14mm. It will support all configurations without problems, these bearings are widely used in competition because they offer a reduction in forcing, resistance and support the highest speeds even with less lubrication.
Mounts on:
-MINARELLI AM6 equipped with a Ø20mm silk crankshaft
-DERBI euro 1, 2 and 3
- PEUGEOT 103 drive side only
-MINARELLI Horizontal and Vertical Scooter
Reference: 508296
Ideal for raising your diagrams or for fitting a 42mm long stroke crankshaft on DERBI euro 1 and 2 engine. Digitally machined aluminum wedge.
Reference: KK01008
Good quality bearing and oil seal at an affordable price.
Reference: 500064C
A complete box of keys that will allow you to make all your repairs, changes.
Reference: 100872
Ideal to reinforce your low engine of minarelli with quality material.
Reference: 329079
A set of 2 high end spy joints for DERBI engine, models with double lips.
Reference: 80000400
Reinforced high-end bearing SKF by BIDALOT. Model 6204 size Ø20 X 47 X 14 mm.
Reference: 7961
Ideal to reinforce your low engine of minarelli with quality material.
Reference: 508298
Ideal for raising your diagrams or for fitting a 44mm long stroke crankshaft on DERBI euro 1 and 2 engine. Digitally machined aluminum wedge.
Reference: 484558
Spare element essential in case of loss, wear ... of your old nut!
Reference: 489848
Ideal for strengthening your lower minarelli engine with quality material.
Reference: 508295
Ideal for raising your diagrams or for installing a long stroke crankshaft on DERBI euro 1 and 2 engine. Digitally machined aluminum wedge.
Reference: KCR-04
An ideal pack to strengthen your low engine on a slightly prepared configuration or original engine! C3 bearings and spy viton seals!
Reference: 451469
A complete high-end engine repair kit, ARTEIN seals, NTN bearings ... For DERBI euro 1 and 2 engines.
Reference: JAC-04
Ideal for a chart riser or fitting a crankshaft long race 43mm DERBI euro 1 and 2, here's hold BARIKIT aluminum base!
Reference: 100013
Set of 2 celeron bearings CARENZI by FAG with spy for DERBI engine.
Reference: 6611566E
Reinforced bearings that will support large configurations without any problem.Available in C3 or C4 set!