Reference: 111010
TNT carburettor type PHVA 17.5 flexible, separate greasing, lever choke (delivered with adjustment jets and elbows)
An excellent 17.5mm PHVA carburetor with lever choke! Comes with its adjustment jets and cable elbow.
Banner
If you want to preserve low consumption while having more performance than with a SHA or other model for endurance or the road for example, the PHBG model will be a very good compromise. This low-cost carburetor is of very high quality and has a multitude of adjustments: richness screw, idle jet, needle valve ... This model is the AD (also exists in BD, AD, DS, DD, black edition, or BS), it is rigidly mounted with a cable choke, you can also switch it to a lever choke without difficulty. Compared to the SHA carburettor, this model is much more precise, efficient in recovery, acceleration and peak speed. This model does not have separate lubrication.
Advice : accompany it with a 17, 17.5 or 19mm pipe, carbon valve slats, pipe as much as possible aligned with the valves, you can simply use an original air filter but also a horn. Provide a range of jets from 86 to 100 depending on the filter used.
The carburetor is delivered as such :
Main jet small standard pitch: 82
Needle W07
40 ° cutting bushel
Needle well AN 262
Idle jet 55
Choke jet 55
Float in 5 grams
These accessories can be changed for better tuning, although these carburetors are very well preset. All spare parts and adjustments can be found here.
Summary :
Phbg AD model
Size 17.5mm
Pipe fixing diameter: Ø24mm
Assembly: rigid
Starter: cable (can also be done with lever)
Fixing diameter for air filter: 32mm threaded (we can also put tulips of different sizes)
Reference: 111010
An excellent 17.5mm PHVA carburetor with lever choke! Comes with its adjustment jets and cable elbow.
Reference: 477455
A very good little red carburettor in 17.5 flexible with choke lever!
Reference: 201.1702
An excellent high quality carburetor at a low price, with separate grease and vacuum sockets! Comes with adapter for filter Ø34 to 36mm.
Reference: 15454
A good carburettor delivered with its automatic / electric choke
Reference: 2613
The BS version of the 17mm PHBG. Version with special choke with large lateral lever, non-threaded, flexible air inlet and possibility of separate lubrication!
Reference: 201.1701
An excellent high quality carburetor at a low price, with separate grease and vacuum sockets! Choice choke cable or lever!
Reference: 1210
A carburettor much better than a TNT which will make you consume little while filling your engine well.
Reference: 201.1703
Ideal to accompany an original or prepared engine, CP POLINI 17.5mm version in rigid mounting.
Reference: 2520
The real PHBG version in 17mm rigid diameter with lever choke and without separate greasing.
Reference: 473029
A good cheap carburetor much better than a TNT that will power your engine.
Reference: 492301
An excellent carburetor PHVA 17,5mm in a choke lever! Comes with adjustable nozzles and cable elbow.
Reference: 478707
Good quality carburettor, ideal for increasing the performance of your 2 wheels! BLACK EDITION type model.
Reference: 1012
Carburettor DELLORTO model PHVA ED 17.5, with outlet for depression and separate lubrication, flexible assembly, version without choke with a reduced price, for installation of electric choke!
Reference: 201.1705
The most powerful version of the 17.5 POLINI CP carburetor! Delivered with a venturi tulip!
Reference: 477454
Good cheap carburetor better than TNT with a good finish and a racing look.
Reference: 477383
A carburetor with a good quality racing look better than a TNT for a relatively low price.