Reference: 492301
Carburettor TUN 'R flexible types PHVA 17,5, separated greasing, choke lever (comes with adjustable nozzles and elbows)
An excellent carburetor PHVA 17,5mm in a choke lever! Comes with adjustable nozzles and cable elbow.
Banner
If you want to preserve low consumption while having more performance than with a SHA or other model for endurance or the road for example, the PHBG model will be a very good compromise. This low-cost carburetor is of very high quality and has a multitude of adjustments: richness screw, idle jet, needle valve ... This model is the AS, it is rigidly mounted with a lever choke, you can also switch it to a cable starter without difficulty. Compared to the SHA carburettor, this model is much more precise, efficient in recovery, acceleration and peak speed. This model does not have separate lubrication.
Advice: accompany it with a 17, 17.5 or 19mm pipe, carbon valve slats, pipe as much as possible aligned with the valves, you can simply use an original air filter but also a horn. Provide a range of nozzles from 79 to 100 depending on the filter used.
The carburetor is delivered as such:
Main jet small standard pitch: 78
Needle W07
40 ° cutting bushel
Needle well AU 262
Idle jet 50
Choke jet 60
Float in 4 grams
These accessories can be changed for better tuning, although these carburetors are very well preset. All spare parts and adjustments can be found here.
Summary:
Model PHBG AS
Size 17mm
Pipe fixing diameter: Ø24mm
Assembly: rigid
Starter: lever (can also be done with cable)
Fixing diameter for air filter: 32mm threaded (we can also put tulips of different sizes)
Spare and adjustment parts
Reference: 492301
An excellent carburetor PHVA 17,5mm in a choke lever! Comes with adjustable nozzles and cable elbow.
Reference: 478708
A carburetor much better than a TNT racing look that will power your engine without spending too much money.
Reference: 201.1701
An excellent high quality carburetor at a low price, with separate grease and vacuum sockets! Choice choke cable or lever!
Reference: 3067
The 17.5mm version of the DELLORTO PHBN LS, with socket for vacuum, antifreeze and separate greasing, flexible mounting, cable choke! Ideal on Booster Spirit, MBK Nitro ...
Reference: 1210
A carburettor much better than a TNT which will make you consume little while filling your engine well.
Reference: 111010
An excellent 17.5mm PHVA carburetor with lever choke! Comes with its adjustment jets and cable elbow.
Reference: 15454
A good carburettor delivered with its automatic / electric choke
Reference: 477454
Good cheap carburetor better than TNT with a good finish and a racing look.
Reference: 201.1703
Ideal to accompany an original or prepared engine, CP POLINI 17.5mm version in rigid mounting.
Reference: 201.1705
The most powerful version of the 17.5 POLINI CP carburetor! Delivered with a venturi tulip!
Reference: 473029
A good cheap carburetor much better than a TNT that will power your engine.
Reference: 477455
A very good little red carburettor in 17.5 flexible with choke lever!
Reference: 1231
The 17.5mm version of the DELLORTO PHBN BT, with socket for depression, antifreeze and separate lubrication, flexible mounting, cable choke! Ideal on scooter as on motorcycle 50!
Reference: 468460
A carburetor much better than a TNT which will save you little fuel while filling your engine well.
Reference: 2613
The BS version of the 17mm PHBG. Version with special choke with large lateral lever, non-threaded, flexible air inlet and possibility of separate lubrication!
Reference: 1012
Carburettor DELLORTO model PHVA ED 17.5, with outlet for depression and separate lubrication, flexible assembly, version without choke with a reduced price, for installation of electric choke!