Reference: 208257C
Stop switch on TNT master cylinder to screw with cable thread Ø10 X 1.25mm universal
Brake contactor screw in place of the brake hose fixing screw!
Banner
This BRAKTEC Repair Kit is for BRATECK and AJP Master Brake Master Cylinders. Indispensable in case of wear, seizing of your old system. This repair kit is a very good compromise so you do not completely change your front brake master cylinder. Comes complete as presented with spring, rubber, push, clips ... model diameter 11mm by length 38mm. The repair, change is very simple, you just unclip the zipper and remove the clips on your lever / master cylinder so that the internal system out and replace it with this one.
Reference: 208257C
Brake contactor screw in place of the brake hose fixing screw!
Reference: 133439
Repair kit for your AJP brand front brake calipers.
Reference: 496340
Repair kit for your GRIMECA brand front brake calipers.
Reference: 208257E
Brake contactor screw in place of the brake hose fixing screw!
Reference: 12978/5
Special hose to resist brake fluids! To connect the jars to the master cylinders!
Reference: 133430
Repair kit for your AJP rear brake calipers.
Reference: 492397
Fixing kit (retaining pin) d.5mm TEKNIX essential for the maintenance and smooth operation of your BREMBO inserts.
Reference: 133434
Repair kit for your front brake calipers of the GRIMECA brand.
Reference: 496335
Repair kit for your GRIMECA brand rear brake calipers.
Reference: 133435
Repair kit for your AJP brand front brake calipers.
Reference: 5MEF59190000
Fixing kit (holding pin) d.5mm YAMAHA, essential for the maintenance and proper functioning of your BREMBO type pads.
Reference: 496336
Repair kit for your BREMBO front brake calipers.
Reference: 00H04702121
Replacement caliper bleed screw, essential in case of wear or breakage of your old part.
Reference: 483804
Indispensable for a perfect and effective seal!
Reference: AP8113248
Original screw for your rear master cylinder!
Reference: 496339
Repair kit for your brake calipers HENG TONG.