Reference: AM00011
2nd gear on secondary shaft 33 teeth TOP PERFORMANCES for MINARELLI AM6 gearbox (original size)
A high quality pinion, ideal for changing your second gear on the secondary shaft.
Banner
Here is the assortment of 300 TNT circlips for all your repairs, mechanical sessions. An essential box in any workshop to always have these small parts difficult to find and fragile after several disassembly, reassembly. Ideal for scooter, motorbike, mob, car ... Very practical storage box, clips classified by size.
Inch and mm sizes available in this kit:
Namely that an inch measures 25.4mm.
-X20 1/8 "= 3.175mm
-X25 1/4 "= 6.35mm
-X15 13/16 "= 20.63mm
-X15 1-1 / 16 "= 29.58 mm
-X15 7/16 "= 11.11mm
-X15 9/16 "= 14.28mm
-X10 5/32 "= 3.96mm
-X15 5/16 "= 7.93mm
-X20 7/8 "= 22.22mm
-X10 1-1 / 8 "= 28.57 mm
-X15 15/32 "= 11.90mm
-X20 5/8 "= 15.87mm
-X15 3/16 "= 4.76mm
-X20 3/8 "= 9.52mm
-X15 1 "= 25.40mm
-X5 1-1 / 4 "= 31.75mm
-X25 1/2 "= 12.70mm
-X25 3/4 "= 19.05mm
Reference: AM00011
A high quality pinion, ideal for changing your second gear on the secondary shaft.
Reference: 240499
Locking washer for clutch plate on MINARELLI AM6 engine.
Reference: 185004
Ideal for refurbishing your minarelli am6 gearbox.
Reference: 32183
A quality item, ideal for refurbishing your oil pump system.
Reference: 504841
A box of complete circlips that will allow you to make all your repairs, changes.
Reference: 138732
Selector barrel supplied with its forks and axes for your mécaboite 50cc.
Reference: AM00005
Quality part, ideal in case of breakage or wear of your old original cap.
Reference: 32171
A high quality gear, ideal for start fresh on your engine.
Reference: 32159
An original type of axis and cheaper than in concession.
Reference: AM00009
A high quality pinion, ideal for changing your 6th gear on the primary shaft.
Reference: AM00037
Gearbox shaft for your Minarelli AM6 2nd series engine.
Reference: 146908
Ideal for refurbishing your minarelli am6 gearbox.
Reference: 11400
Quality part, ideal in case of breakage or wear of your old original cap on AM6 engine.
Reference: 485296
Ideal in case of breakage or wear of your old circlip.
Reference: AM00012
A high quality pinion, ideal for changing your third gear ratio on the secondary shaft.
Reference: 32176
Ideal in case of pronounced wear of your old room! Much cheaper than the origin.