Reference: 480772
Block "block" piston TUN 'R M12X125
Quality piston block, specific size M12 X 125 with hexagonal head.
Banner
Here is a standard setting rod, at a very low price it will allow you to adjust the ignitions with ease, it is certainly less practical than a BUZZETTI or TUN 'R luxury, but it is also less expensive! For use it is relatively simple, position the piston at TDC, just touch / brush the piston against the rod of the rod, and put the line of the nozzle face to zero, tighten the lock nut against the nozzle so that it does not move any more, your rod is therefore at zero and your engine at PHM (top dead center).
It only remains for you to screw, if your engine controls for example, make a full turn by screwing until you put the line face down to zero you are therefore at 1mm before TDC, then tighten again until number 2, you are therefore 1.2mm before top dead center.
Reference: 480772
Quality piston block, specific size M12 X 125 with hexagonal head.
Reference: 49316000
Ultra reinforced rounded head piston block, ideal on machines where the spark plug is "tilted" like motobecane, vespa, 2T scooters ...
Reference: 10070830
A good quality diagram disc that will be perfect for your engine preparations.
Reference: 4936
The must of setting rods. It is ultra precise and will facilitate the assembly of your ignition.
Reference: 468226
TUN 'R piston block with Teflon tip to avoid breakage during disassembly.
Reference: 83008130
Complete support for diagram disc, 4 threads to choose from.
Reference: 173.0002
The must of calibration wedges. It is ultra precise and will facilitate the assembly of your ignition.This tool also allows the control of parts!
Reference: 7582
Splined TUN 'R piston block for easier hand tightening.
Reference: 513531
A superb quality mass machined aluminum chart disc, delivered with its needle!
Reference: 489437
Quality piston block, specific size M14 X 1.25mm with nylon tip.
Reference: 517680
TUN'R piston block, an essential tool when you want to do mechanics, with plastic tip.
Reference: 505730
TUN 'R piston unit, an essential tool when you want to do mechanics.
Reference: WI301430
Strobe light for a more precise adjustment of your ignitions!
Reference: 49312500
Ultra reinforced rounded head piston block, ideal on machines where the spark plug is "tilted" like motobecane, vespa, 2T scooters ...
Reference: FS118600
HELLA stroboscopic lamp for an extremely precise adjustment of your ignitions!