Reference: 507024
Universal CGN fork gaiter for moped, motorcycle ... Ø27mm / 45mm length 210mm
Pair of CGN fork boots on moped MBK 51, PEUGEOT 103 ...
Banner
A chrome EBR RACING fork, standard adjustable in height to improve the handling and aesthetics of your PEUGEOT 103 or MBK 51! Between axis of the tees adjustable from 15 to 20.5cm. Brake block on one side only, delivered with speedometer support.
Here is the EBR RACING fork, it is delivered as in the photo, that is to say complete with the upper and lower triple clamps as well as the headlight brackets and the handlebar fixing (handlebar bridge).
This chrome fork can give a nice style to your PEUGEOT 103 or even MBK 51, do not hesitate to look at the technical characteristics if you are not sure of the assembly!
Above all, it has a low price! Its diameter of 30mm for the top and 35mm for the bottom except at the joints where the diameter is 43mm. It is made in Italy, it is also improved compared to the original fork for better handling and better absorption of irregularities, bumps...
It has a single brake block. It does not have a bracket to fit a disc brake caliper.
-Material: Chrome steel
-Stroke: 85mm
-Delivered with: headlight brackets, triple clamps, handlebar bridge, speedometer support...
-Diameter of the tubes: 30mm for the top and 35mm for the bottom
-Tees tube diameter: 25mm
-Height adjustable: yes
-Adjustment of the between-axis of the tees: Yes from 15 to 20.5cm
-Brake block: Yes, reversible on one side only, thickness 8mm, height 15mm
-For wheel axle: Ø12.5mm maximum
- Between axis of the tubes: 11.7cm maximum
-Total length of the tubes: 70cm at the lowest (cutting of the springs possible)
-System: standard springs
-Fixing the mudguard: Yes, 2 screws Ø6mm on each side, between axis of 18 to 50mm adjustable
-Recommended maintenance: Lubrication every 5000km, belgom chrome and fine steel wool in case of rust.
Reference: 507024
Pair of CGN fork boots on moped MBK 51, PEUGEOT 103 ...
Reference: F011290085N
A black, hydraulic EBR RACING fork in height-adjustable aluminum to improve the handling and aesthetics of your PEUGEOT 103 or MBK 51! Between axis of the tees adjustable from 15 to 20.5cm. One-sided brake block, supplied with handlebar support.
Reference: 156278
Headlight bracket P2R for moped MBK 88/881 blue.
Reference: 526326
High quality original type element for your PEUGEOT FOX moped.
Reference: S2126A
A cheap PEUGEOT type black fork.
Reference: 141830
A low-cost fork body for refurbishing your MBK 51 fork.
Reference: C6350
Ideal for giving new life to your PIAGGIO SI 50.
Reference: 147632
A low-cost fork body for refurbishing your MOTOBECANE 88 fork.
Reference: 3356
Ideal for refurbishing your original fork.
Reference: 171812
Fork reflector for PEUGEOT 103 screw fixing
Reference: F011290002 Noire
Black fork of origin type for moped PIAGGIO CIAO PX. Rigid and lightweight model, without damper.
Reference: F011290002
Reinforced rigid fork, chrome, light and nice aesthetic for your PIAGGIO CIAO.
Reference: 182101
High fork spring fixing kit for MOTOBECANE / MBK moped
Reference: 519128
Spring set for your moped fork!