Reference: 320803
Hose gasoline CGN Ø8X12mm black (30cm)
Hose capacity for a solid fuel system and resistant in time .. Sold in length of 30cm.
Banner
Here is a universal TEKNIX fuel tap that will cut or open the fuel supply circuit as well as remove your depression from your scooter or mécaboite. The tip is 8mm in diameter so for hose from Ø7 to 8mm.
Of good quality and good finish, it has a stop notch on ON, RES for reserve and on OFF in order to block the lever in the event of an opening or closing of the fuel circuit. comes with an O-ring for a perfect seal.
Reference: 320803
Hose capacity for a solid fuel system and resistant in time .. Sold in length of 30cm.
Reference: 466576
Ideal for refurbishing your manual gasoline inlet.
Reference: 25631
A very practical faucet, cheaper than the original but of identical quality.
Reference: 496625
A handy tap, cheaper than the original but of identical quality.
Reference: 247557
Ideal for refurbishing your fuel delivery system at a lower cost.
Reference: 1419
Hose capacity for a solid fuel system and resistant in time .. Sold in length of 30cm.
Reference: 420311
Essential part for the proper functioning of your gasoline supply!
Reference: 420359A
Fuel valve original type for 50cc motorcycle HM unqualified sensor.
Reference: 483302
A perfect quality of petrol tap for a personal fitting!
Reference: 496629
A very practical faucet, cheaper than the original but of identical quality.
Reference: 506951
1 meter 6x9mm black fuel hose kit supplied with transparent conical filter.
Reference: 460034
CGN fuel circuit cut-off to replace the valve or in the event of wear of the vacuum pump.
Reference: 483767
A quality fuel tap ideal for personal assembly!
Reference: 320765
Ideal in case of breakage, loss or simply wear and tear on your necklace.
Reference: 483721
A universal petrol valve, fixing by Ø10mm filament (standard liquid).
Reference: 483419
A one meter hose that can be used for many applications, reinforced model 3mm thick.