Reference: 479506
Air filter oil, cornet PUTOLINE ACTION FLUID 1L
An air filter oil very well designed to stick foreign bodies without blocking the air supply of your engine.
Banner
POLINI competition air filter foam board to cut, size 21 X 29.7cm / thickness 19mm uncompressed. This foam can be used for your original air boxes or personal assembly on your filters, air box ...
This specific foam for POLINI racing filters is a double layer, the blue material is a fine foam for the microparticles, the black foam is thicker and honeycombed. The breathing will be perfect. It was tested and approved in competition by many teams before marketing.
Expanded polyurethane, crosslinked polyester base
Washable with air filter cleaning product
Porosity 60 PPI for blue
Porosity 30 PPI for the quarter note
The outer surface is wavy. It offers a greater entry of air flows, while
retaining 50% more dust.
The efficiency of the filter is guaranteed according to European Standards EN779 of degree G3-G4 with weight efficiency of 90% and, in particular, of more than 50% on micron particles.
Reference: 479506
An air filter oil very well designed to stick foreign bodies without blocking the air supply of your engine.
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 31301
A simple filtration layer foam ideal to prepare your original air box.
Reference: 1413965
A foam that can adapt to all air boxes for optimal air filtering.
Reference: 04 6199
A very good tulip horn for better suction of your engine.
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 0413434
A competition filter with expanded foam that allows a large volume of air and therefore better recovery and performance.
Reference: 114010Z
MARCHALD FILTERS foam air filter for motorcycle VALENTINI RACING 50
Reference: 04 3072
Here is a small filter that allows you to have a lot of area while taking up little space.
Reference: 203.0146
Model with outlet and right attachment, a high quality filter version EVOLUTION 2.
Reference: S410000200004
A very high quality air filter that will filter all impurities without disturbing the engine performance.
Reference: S410000200010
A competition filter with expanded foam that allows a large volume of air and therefore better recovery and performance.
Reference: 343.0023
Ideal for adapting your Ø34 / 35mm air filter on your POLINI CP carburetor.
Reference: 115050
K&N green horn type air filter, angled at 45 ° but adjustable at half the elbow! A very good filter that breathes well.
Reference: 114010W
MARCHALD FILTERS foam air filter for motorcycle SHERCO 50
Reference: 482106
A quality filter original type, single layer of black foam.
Reference: 1413963
A foam that can adapt to all air boxes with optimal air filtering.