Banner
A reinforced vilo with a super low price for your 51!
Is it possible to reduce the price while maintaining very good quality? TEKNIX proves us once again the possibility! Here is a very good product from TEKNIX for MBK 51 / MOTOBECANE AV10 / AV7 engine. This crankshaft is a reinforced model with masses fuller than the origin and a finish to the height.
For a very reduced price, you will have a good little vilo, it uses very good steels for its design, its balancing is not bad, the connecting rod is a reinforced model and it rests on a reinforced / treated silver / cage. increased with anti-friction shims. Fuller masses will provide a little more pre-compression.
Thanks to all these improved parameters, the engine will gain in performance. It will be clearly ideal to accompany a small 70cc or a small 50cc kit, obviously, it will not follow on very powerful engines which require high speed! It will also and above all be ideal for refurbishing an original engine or not, this with good equipment for a good price!
Summary :
Masses: semi full
Reinforced: yes
Keying: no (you will have to fix your ignition with a setting rod)
Needle cage: included with the vilo, reinforced
Bristles: Ø16mm as the origin
Connecting rod: 85mm between axis as the origin
Right-hand thread
Spare parts :
Reference: 441286
The most upscale on the market with the BIDALOT.
Reference: rrd-cale-1-5mm-AV7
1.5mm high quality aluminum shim machined for MBK / MOTOBECANE AV7. Ideal to put the long races to increase its diagrams!
Reference: 508823
A reinforced vilo with a super low price for your AV10 and AV7, reverse thread "not on the left".
Reference: 425
A very good quality mid-range crankshaft designed to go up to 14,000 rpm!
Reference: 12100515
Reinforced crankshaft of very good quality.
Reference: CIG-135
The original reinforced version of BARIKIT crankshafts for MOTOBECANE / MBK 51, ignition thread on the left!
Reference: 6034072
A very good quality crankshaft that will support all your requirements in terms of robustness and performance.
Reference: rrd-44.9-51
Long stroke competition crankshaft 44.9mm for MOTOBECANE AV10 / AV7 / MBK 51 ...
Reference: AMT 170M
Ideal to accompany a push configuration, 70cc or more! Specially designed for MBK MAGNUM. Standard right-hand tightening thread!
Reference: rrd-cale-1-mm-AV7
1mm wedge in high quality machined aluminum for MBK / MOTOBECANE AV7. Ideal for laying down long runs to increase your charts!
Reference: 53 5779
The best crankshafts for your MBK 51, MOTOBECANE av10 or av7 engine.
Reference: AMT 170
Ideal to accompany a push configuration, 70cc or more! For MBK 51 / motobecane av10 / av7. Ignition thread reversed on the left!
Reference: 31140739
One of the best crankshaft on the market with top balancing, revised and corrected lubrication and of course with a top finish as usual at AIRSAL. Here is the direct competitor of the famous DOPPLER Endurance crankshaft.
Reference: 263985
The best value market price! The ER1 for your MBK / MOTOBECANE AV10 and AV7 engines.
Reference: 535505
Alas now unavailable because no longer manufactured! The famous long race for MBK 51, engine av7, av10 ...
Reference: CIG-137
Ideal to support an advanced configuration, 70cc or more! Specially designed for MBK MAGNUM. Standard right hand tightening thread!
A reinforced vilo with a super low price for your 51!
