Reference: 483769
Set of 3 Replacement soft stones TUN 'R for cylinder honing tool
Well useful spare stones to continue using the lap TUN 'R for cylinder.
Banner
Here is the lap with 3 soft stones TUN 'R for cylinder from Ø35 to 80mm. This tool will be used to break in the cylinder and make up for small defects due to preparation, manufacturing when the cylinder is new, or a small primer...
This lap has 3 stones is simply used at the end of a screwdriver, it is adjustable in hardness and width. For use, attach it to the end of a screwdriver, oil the cylinder and the stones, then gently rotate the stones previously stretched in the cylinder, going back and forth.
This lap can be used on cast iron cylinders as well as nykasil or chrome treated aluminum cylinders. This tool is also ideal when changing a piston side to recreate a few micro scratches that will hold the cylinder lubrication. We regret one thing, no spare stone is supplied with the lap, however it is a high quality tool for all those who wish to preserve their cylinders.
Reference: 483769
Well useful spare stones to continue using the lap TUN 'R for cylinder.
Reference: 467408
Studs reinforced, treated and much cheaper than the real origin.
Reference: 156263
Set of 4 M7 nuts with their 4 washers.
Reference: 27 8359B
Essential for the refurbishment of your cooling system.
Reference: JAC-07
The shim needed for crankshaft race long 42 / 43mm on minarelli horizontal!
Reference: 87308000
Ideal in case of breakage, loss or worn thread of your old nut.
Reference: S.1447 - 001447 (PIAGGIO)
Ideal in case of breakage, loss or worn thread of your old nut.
Reference: 12400912
A wedge required for the passage of large crankshafts and high engine FACTORY from BIDALOT!
Reference: X4 12512042
Reinforced and elongated nuts to better tighten the cylinder head and more precisely. They can withstand much higher tightening torques!
Reference: 4755
Spare nut essential for mounting your high engine!
Reference: 19 9419Q
Ideal for replacing your old bolts MALOSSI MHR.
Reference: 87181000
Ideal in case of breakage, loss or worn thread of your old nut.
Reference: 315.0023
POLINI bleed plug for 1/8 cylinder head with copper gasket
Reference: 0716344
The shim necessary for crankshafts 85mm long connecting rod on horizontal minarelli!
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 317.0108
Reinforced elongated studs special for horizontal liquid minarelli motor scooter.
Reference: 87170000
Ideal in case of breakage, loss or worn thread of your old nut.