Reference: LC.12.2
Valves ITALKIT competition subscribed minarelli am6
High quality competition valves, aluminum base adhered!
Banner
The POLINI motori boards are based on high quality carbon fiber, they are to be cut yourself. The boards are 2 in number and are 110mm by 110mm (11 X 11cm). You have to choose between these thicknesses: 0.25 / 0.28 / 0.30 / 0.33 / 0.35 / 0.40 and 0.45mm. The carbon allows a more frank admission, less harmful vibrations… therefore higher performances. A harder valve will provide more high revs but less torque (it will go into self-vibration/resonance range) later! The softer reeds will vibrate sooner, more acceleration but the engine will bridle at lower revs. You will therefore have to find the right compromise.
In order to cut your valve slats after carefully tracing their shape, a simple pair of scissors will suffice.
Confirmed tuners will certainly appreciate the many sizes available and the quality of these slats to achieve maximum performance with their engines!
Reference: LC.12.2
High quality competition valves, aluminum base adhered!
Reference: 440167
High quality slats to better exploit the high revs of your motorcycle 50cc am6 engine!
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: LP.44.40
Replacement blade set essential for the proper functioning of your admission Competition ITALKIT double roofs.
Reference: LC.44.400
The must of the admission kits for large configuration with carburetor in 28 to 35mm. Reserved for connoisseurs! Hyper short, super diffusion, carburetor up to 35mm, vibration scrub ... Simply the best.
Reference: 213.0036
High quality valves, delivered with 2 different thicknesses of carbon slats!
Reference: 009512
High quality competition valves, bonded aluminum base!
Reference: 284766
High quality slats to better exploit the high revs of your motorcycle 50cc am6 engine!
Reference: 494635
Optimize the performance of your mécaboite!
Reference: 2715810.C0
The famous MHR Vl18 valves! Guaranteed performance!
Reference: 27 4235.K0
Valves that are suitable for both small and large configurations.
Reference: LP.44.3
A set of 2 improved slats for motorbike with minarelli am6 engine.
Reference: 2013801
A very high-end special for large carburations on MINARELLI AM6, DERBI ...
Reference: 511244
Quality valve for your MINARELLI AM6, DERBI EURO 2, 3 and 4 engine.
Reference: 449775
Small flap valves made of fiberglass for your am6 engines.
Reference: CL 10
A competition model that will allow you to greatly improve the performance of your 2 wheels.