Banner
0.5 wedge that does not squish to increase your diagrams and therefore with an exact measurement for your squish.
Here is the cylinder shim / base gasket 0.5mm thick. DOPPLER brand, this wedge / seal does not crush in the tightened and allows you to increase your diagrams. With this wedge no need to install an additional seal according to your needs! Ideal for increasing the diagrams of your cylinder. Good quality, the price is only for one seal / shim! Shape adapted to 50cc DOPPLER cylinders.
Reference: S410210006042
Reinforced compressed 0.35mm seal for your 103, fox, wallaroo in 3 large transfers only.
Reference: 440825
Gasket reinforced for a longer duration of life.
Reference: VJ.26.2
A high quality joint pack to refurbish your GILARDO 46mm on 103!
Reference: S410420012001
High quality seal from ATHENA.
Reference: 467230
Exhaust gasket round copper large diameter good quality at low price!
Reference: 737841
For safe installation and leak change every reassembly.
Reference: 56220.03
Spare seal pack for your PARMAKIT kit!
Reference: 334157
0.50 joint that does not crush to increase your diagrams and therefore with an exact measurement for your squish.
Reference: rrd-jt-cu-0.5-50-pgt-103
Top-of-the-range head gasket for compression and a high engine guaranteed without leaks!
Reference: 683
Ideal for reassembling its leak for a more reliable engine. Ideal for 3 transfers, small or large ...
Reference: 11 3143
MALOSSI quality complete seal pack for your aluminum or cast iron kits in 70cc on 103, fox, wallaroo ...
Reference: JUN-962
The BARIKIT Ø46mm cylinder head gasket for your 70cc air-cooled kits on PEUGEOT 103.
Reference: 56209.03
Ideal for reassembling your big 50mm 77cc PARMAKIT kit on 103 without leaking!
Reference: 209.0192
To be replaced with each dismantling, the POLINI gaskets for 70cc liquid cooling kit on PEUGEOT 103!
Reference: cale_1mm_103_MALOSSI
Perfect for augmenting your diagrams on 103, fox and wallaroo.
Reference: 06 3140
Perfect for settling your squish.
0.5 wedge that does not squish to increase your diagrams and therefore with an exact measurement for your squish.
