Banner
1mm joint that does not crash to increase your diagrams and therefore with an exact measurement for your squish.
Here is the cylinder block / base gasket 1mm thick. TEKNIX brand, this wedge / joint does not crush the clamp and allows you to increase your diagrams. With this wedge no need to install an additional seal! Ideal to increase the diagrams of your cylinder or ask your long strokes. Good quality, the price relates to only one joint / wedge!
Reference: 14020846 - 14042346
Ideal for refurbishment perfect and without leakage. Make sure you change your joints at each refitting.
Reference: rrd-cale-1mm-103-parmakit
1mm wedge in high quality machined aluminum for PARMAKIT large transfer cylinders of PEUGEOT 103, FOX, HONDA WALLAROO. Ideal for laying down long runs to increase your charts!
Reference: 56209.03
Ideal for reassembling your big 50mm 77cc PARMAKIT kit on 103 without leaking!
Reference: 683
Ideal for reassembling its leak for a more reliable engine. Ideal for 3 transfers, small or large ...
Reference: JUN-962
The BARIKIT Ø46mm cylinder head gasket for your 70cc air-cooled kits on PEUGEOT 103.
Reference: 508294
Wedge of 1 that does not squish to increase your diagrams and therefore with an exact measurement for your squish.
Reference: rrd-cale-1mm-103
1mm shim in high quality machined aluminum for PEUGEOT 103, FOX, HONDA WALLAROO. Ideal for posing long races to increase your diagrams!
Reference: 209.0192
To be replaced with each dismantling, the POLINI gaskets for 70cc liquid cooling kit on PEUGEOT 103!
Reference: 06 3141
Perfect for increasing your diagrams on 103, fox and wallaroo.
Reference: 06 3140
Perfect for settling your squish.
Reference: VJ.26.2
A high quality joint pack to refurbish your GILARDO 46mm on 103!
Reference: rrd-cale-9mm-103
Special 10mm shim for long stroke crankshafts / RRD long connecting rods on PEUGEOT 103.
Reference: 11502529
Upmarket joint with thickness choice for your SQUICH.
Reference: rrd-cale-9mm-103-parmakit
Special 9mm shim for large PARMAKIT Ø50mm air or liquid transfer cylinders with long stroke crankshafts / long RRD connecting rods on PEUGEOT 103.
Reference: 334157
0.50 joint that does not crush to increase your diagrams and therefore with an exact measurement for your squish.
Reference: S410360012001
Very high-end reinforced copper pot seal.
1mm joint that does not crash to increase your diagrams and therefore with an exact measurement for your squish.
