Reference: 09811_00
Aluminum tank for cap on carburettor DELLORTO PHBG and PHBD
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Banner
Complete cable starter kit. Allowing you to repair your choke or even to convert a PHBG lever carburettor into a cable choke carburettor. Certified high quality, genuine DELLORTO INC. Delivered complete, it includes the sleeve, the spring, the piston (vavle), the adapter, the adjuster and its lock nut.
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 30 3339
A quality transparent tank with plug for PHBG and PHBD carburettor.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 1285
Ideal in case of leakage for a good quality repair at low price.
Reference: 8431
tank gasket for GURTNER carburetor.
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 09444_00
The replacement tank at low prices for your DELLORTO carburettors.
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.