Reference: 02838_00
Needle for carburettor DELLORTO PHBG, PHBG Racing, SHA
Ideal in case of problem, breakage or loss of your old part!
Banner
A fuel leak is often synonymous with a dead float or a worn needle. The float when it fills with gasoline no longer closes the inlet and the carburetor starts to leak, so it is important to maintain the carburetor and change the float if necessary. This float is the standard 4 gram model.
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 129517
The only wealth screws for your PHBG!
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 8431
tank gasket for GURTNER carburetor.
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.