Reference: 473464
Transparent tank TUN 'R for carburettor DELLORTO PHBG and PHBD with screw and seal
A very aesthetic tank delivered with its seal and screws for a very good price!
Banner
Ideal after wear, breakage ... Here is the reduction ring for your PHBG carburettors. Good quality and sold individually. It will allow refurbishment at a lower cost.
Characteristics:
External diameter 26mm
Internal diameter 24mm
16mm wide
Rigid plastic
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 1298
The little room in which hangs the starter cable.
Reference: 53016_00 / B53016B
Kit of complete collar for rigid carburettor PHBG and SHBC!
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 1285
Ideal in case of leakage for a good quality repair at low price.
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 8431
tank gasket for GURTNER carburetor.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.