Reference: 09538_00
Full lever choke lever for carburettor PHBG DELLORTO
Ideal to pass your choke cable pull or to repair your PHBG!
Banner
Here is the spring idle screw on carburettor DELLORTO. Ideal for refurbishment after loss or wear that little spring that is required for proper operation and adjustment on your carburetor. Sold individually as presented. Remember, this spring is mandatory because it preserves the living power in order not to lose while driving (like a lock nut).
External -Diameter spring: 7,20mm
-Diameter Internal spring: 5mm
-length Spring: 14mm uncompressed and compressed 6mm maximum
Mounts on the carburetor:
- PHBG / PHBE / PHBH / PHBL / PHBN / PHVA / PHF / PHM ...
Reference: 09538_00
Ideal to pass your choke cable pull or to repair your PHBG!
Reference: 53016_00 / B53016B
Kit of complete collar for rigid carburettor PHBG and SHBC!
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 10431
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!
Reference: 506272
Excellent in the event of a problem or leak from your carburetor.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 129514
For a refurbishment at a lower cost for a perfect seal.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 1280
Ideal for refurbishment or for loss.