Reference: 09814_00
Tulip / venturi improvement adapter DELLORTO Ø32mm threaded X Ø60mm for PHBG
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Banner
Complete tube kit, length 40mm excluding thread, 90 ° angle. For accelerator or choke cables on DELLORTO SHA carburettor. Can be mounted on all DELLORTO models with standard thread! Delivered as presented with lock nut, tube, rubber, threaded length adjustment tube.
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 10431
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 8431
tank gasket for GURTNER carburetor.
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 53002_00 / 53002_78
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 1298
The little room in which hangs the starter cable.
Reference: 09444_00
The replacement tank at low prices for your DELLORTO carburettors.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 53024
The complete richness screw for your PHBG carburettors!