Reference: 10431
Cup bottom of tank on carburettor DELLORTO PHBG and others (small main jet)
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!
Banner
Tank bottom plate (anti-emulsion washer) to jet small step 5mm. Is placed between the needle jet and jet. Despite rumors is said of some, it is by no means a flange. Rather a piece that allows better mixing of the oil / gasoline (when he arrived in the tank), which prevents air bubbles and emulsions ... For DELLORTO carburettors PHBG, PHBG Racing Black / Red Edition Model ... not deep (also available in deep model).
Reference: 10431
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!
Reference: 10431
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!
Reference: 53002_00 / 53002_78
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 1285
Ideal in case of leakage for a good quality repair at low price.
Reference: 09444_00
The replacement tank at low prices for your DELLORTO carburettors.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.