Reference: 5910
LOCTITE Silicone Black Joint Paste 40ml
A top-of-the-range joint compound for maximum resistance and tightness. This paste resists from -55 ° to 250 ° C without problem.
Banner
Ideal for refurbishing your seal (ignition covers, transmission housings, oil, gearbox and other applications on the engine part…). Here is the tube of LOCTITE joint compound in metal gray color with excellent properties. Whether in terms of resistance, flexibility during installation or duration over time!
This is because it can withstand various oils, lubricants and coolants. Regarding its temperature resistance, its range is - 55 ° C to 250 ° C (continuous) and 250 ° C max at peak! The paste is not recommended for the parts in permanent contact with the fuel, it can be used in addition to an existing gasket pre-cut by hand to greatly improve the seal and the traditional gasket. Clearly, a high quality product (renowned brand) in terms of resistance and various applications.
Reference: 5910
A top-of-the-range joint compound for maximum resistance and tightness. This paste resists from -55 ° to 250 ° C without problem.
Reference: 156190
A standard 0.50mm joint board + BA55 0.5mm cardboard joint
Reference: 3450
A very well studied paste for filling or repairing your metal, aluminum, ceramic, wood and even plastic parts.
Reference: 440922
A very good quality product, ideal for cutting your own joint.
Reference: 3463
A material addition paste used by our team for great preparation. The quality is present. Practicality too!
Reference: M813002000001
Paste with elastic joint and resistant to high temperatures. (300 ° C)
Reference: 1379570
Fast setting adhesive gel form, high resistance to adding material, filler metals / some plastics, rubber, wood, paper, leather ....
Reference: P300000999002
Paste with elastic joint and resistant to high temperatures. (300 ° C). In a set of 12 tubes!
Reference: VKM00040
Artein cutting joint sheets
Reference: 168917
A top-of-the-range, quick-setting sealant for maximum resistance and tightness.
Reference: 279134_cgn
A good quality paste that resists up to 180 ° C with a maximum drying time after 24 hours.
Reference: 152122
Kit of four reinforced fiber gasket sheets 250°C, different thicknesses included.
Reference: 440923
ARTEIN self-cut seal sheets 0.15 0.25 and 0.50 mm.
Reference: 3450
A very well studied paste for filling or repairing your steel parts.
Reference: 036.164
Elastic joint paste resistant to high temperatures. (300 ° C)