Reference: 279134_cgn
Joint paste LOCTITE 510 syringe 25ml
A good quality paste that resists up to 180 ° C with a maximum drying time after 24 hours.
Banner
Here is the PRESTO joint paste for muffler. This paste is not used to plug cracks or holes on your exhaust system. It simply serves to ensure that your pot does not leak at the various joints that the team. It is practical when mounting to glue joints or facilitate the sliding of the joints, sleeves! It must therefore be applied directly to the joint or the socket to obtain a perfect seal. A product not to be neglected for a safe and leak-free assembly as a new part ex factory!
Reference: 279134_cgn
A good quality paste that resists up to 180 ° C with a maximum drying time after 24 hours.
Reference: VKM00040
Artein cutting joint sheets
Reference: 156189
Two standard joint boards in 0.25 and 0.50mm + BA55 0.3mm cardboard joint + steel reinforced joint in 1mm
Reference: 440922
A very good quality product, ideal for cutting your own joint.
Reference: 440924
Cutting sheets to cut yourself ARTEIN 0.8 and 1.2 mm, ideal for the manufacture of cylinder head or exhaust!
Reference: 152122
Kit of four reinforced fiber gasket sheets 250°C, different thicknesses included.
Reference: 5910
A top-of-the-range joint compound for maximum resistance and tightness. This paste resists from -55 ° to 250 ° C without problem.
Reference: 2374
A low viscosity paste which will allow you a perfect sealing of your engine. This paw is often used by professionals.
Reference: SI 5660
A top-of-the-range joint compound for maximum strength and tightness. This paste resists from -55 ° to 250 ° C without problem.
Reference: 3479
Large quantity of 500 grams. A professional product, high quality sticks very well, it is flexible and takes well to heat.
Reference: 5926
A high-end sealant for maximum resistance and sealing from -60° to + 250°.
Reference: 492203
A professional product, high quality, designed to repair any type of plastic body such as bumper, motorcycle fairing, scooter, ....
Reference: 156190
A standard 0.50mm joint board + BA55 0.5mm cardboard joint
Reference: 152111
Ideal for creating your own engine gasket, carburetor and many other uses.
Reference: P300000999002
Paste with elastic joint and resistant to high temperatures. (300 ° C). In a set of 12 tubes!
Reference: 3450
A very well studied paste for filling or repairing your metal, aluminum, ceramic, wood and even plastic parts.