Reference: 279134_cgn
Joint paste LOCTITE 510 syringe 25ml
A good quality paste that resists up to 180 ° C with a maximum drying time after 24 hours.
Banner
This syringe contains 10g of fast setting adhesive gel form, high resistance power for additions or repair of materials up to 5mm thick, spackling on metal parts, aluminum, ceramic, wood and plastic loaded, paper , leather, rubber .... Color transparent gel, the viscosity is high.
Easy to use and application, curing is fast, its setting time is between 3 to 5 minutes depending on the conditions of preparation of your parts, outside temperature .... His final strength will be reached after 24 hours
A truly professional product for your engine preparations, casings ... and many other uses. Ideal on porous and difficult parts.
Reference: 279134_cgn
A good quality paste that resists up to 180 ° C with a maximum drying time after 24 hours.
Reference: VKM00040
Artein cutting joint sheets
Reference: P300000999002
Paste with elastic joint and resistant to high temperatures. (300 ° C). In a set of 12 tubes!
Reference: 036.164
Elastic joint paste resistant to high temperatures. (300 ° C)
Reference: 3479
Large quantity of 500 grams. A professional product, high quality sticks very well, it is flexible and takes well to heat.
Reference: 440922
A very good quality product, ideal for cutting your own joint.
Reference: 156189
Two standard joint boards in 0.25 and 0.50mm + BA55 0.3mm cardboard joint + steel reinforced joint in 1mm
Reference: 5926
A high-end sealant for maximum resistance and sealing from -60° to + 250°.
Reference: 171800
Ideal for safe and leak-free mounting of your exhaust.
Reference: 440923
ARTEIN self-cut seal sheets 0.15 0.25 and 0.50 mm.
Reference: 152110
Kit of four 150°C paper seal sheets, different thicknesses included.
Reference: P300000999001
Pack of ATHENA Racing cutting edges with joint pipe.
Reference: 3463
A material addition paste used by our team for great preparation. The quality is present. Practicality too!
Reference: 440924
Cutting sheets to cut yourself ARTEIN 0.8 and 1.2 mm, ideal for the manufacture of cylinder head or exhaust!
Reference: 5910
A top-of-the-range joint compound for maximum resistance and tightness. This paste resists from -55 ° to 250 ° C without problem.