Reference: 247751
Valves DOPPLER ER2 for MBK 51 / MOTOBECANE AV10
A well worked room for a considerable performance boost on your MBK.
Banner
Ideal for mounting your flexible carburetors from 17 to 21mm, it is extremely short and well ventilated / studied. It has a machining (label type) to put a flexible sleeve, the latter is also delivered with this pipe, as well as the 2 clamps, you can install your carburettors from 17 to 21mm flexible mounting (fixing diameter on the sleeve from 21 to 25mm).
The DOPPLER logos are inscribed on each side of the pipe, remember that the flexible assemblies avoid the emulsion of gases, vibrations and jolts in the carburetor, these assemblies therefore improve performance!
The ideal tightened to mount it with MALOSSI VL2 valves and to align the pipe at the inlet of the valves, while breaking the inlet angles of the front valves. This pipe is delivered quite raw, to be reworked if possible! Ideal for preparers.
Reference: 247751
A well worked room for a considerable performance boost on your MBK.
Reference: 293370
A quality sleeve that absorbs vibrations very well for better gas flow.
Reference: 02 6090B
A pipe of very good quality as usual at MALOSSI. This pipe is micro-blasted to prevent gas rebounds. It will agree very well with a 15mm carburetor.
Reference: 02 2962B
A fairly short pipe for maximum performance. It is mounted with a 15mm carburetor. In a very clear well studied and finished pipe for a good earning power of your engine.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 1408
At a good price and ideal to accompany a 14 to 16mm SHA carburetor on your MBK 51.
Reference: 215.0350
Ideal in case of breakage, wear your old pipe ... special admission for casings POLINI engines.
Reference: 215.0245
High-end POLINI 15mm diameter valve box for MBK 51.
Reference: 1314916B
Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...
Reference: 159643
At a good price and ideal to accompany a 15 mm PHBG and SHA 14-15-16 carburettor on your MBK 51.
Reference: 51305.05
For performance and strong motor! Accompanied with a rigid SHA carburetor 15 to 16mm.
Reference: 215.0242
Top model ideal for mounting a carburetor SHA 15 or 16mm on your MBK 51.
Reference: 928.270.006
POLINI pipe for THOR engine or adaptation on PEUGEOT 103 / MBK 51 requiring an elbow admission!
Reference: 516868
A perfect pipe to mount a carburettor in flexible assembly with a diameter of 17 to 21mm. It is very short and very well venturized to have a good power gain.
Reference: 8542
Pipe for 15 or 16mm SHA carburetor.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 02 6704
A pipe especially for MALOSSI G2 housing but few also be mounted on DERBI EURO 1, 2 and 3. It was created to mount your 24mm carburetors (RIGID PHBG or with flexible sleeve for passage).