Banner
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Here is the starter spring on carburettor DELLORTO. Ideal for refurbishing after loss or wear that little spring that is required to operate the starter on your carburetor. Has sold the unit. It is important to clarify that this spring closes and leaves the choke under pressure piston!
Mounts on the carburetor:
PHBG / PHBE / PHBH / PHBL / PHM / VHSB / VHSA / ...
Reference: 53002_00 / 53002_78
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 129517
The only wealth screws for your PHBG!
Reference: 8431
tank gasket for GURTNER carburetor.
Reference: 9482
The replacement cover for your DELLORTO PHBG carburetors except racing black edition.
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 129514
For a refurbishment at a lower cost for a perfect seal.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 493928
A very aesthetic tank delivered with its seal and screws for a very good price!
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
