Pack BIDALOT RACING FACTORY 94cc (& label) 2014 for mécaboite minarelli am6

A pack full 100% designed for larger configurations on circuit, run ....

More details

manufacturers : BIDALOT
BIDALOT BIDALOT



This product is no longer for sale!

The version pictured is LABEL, prepared by the brand BIDALOT racing department. Reserved only for competition.

2014 Big news !!! Here is the new engine pack BIDALOT RACING FACTORY 94cc in Ø50mm diameter for engine MINARELLI AM6. Available in Version FACTORY or FACTORY LABEL (prepared directly from Bidalot), this kit reaches the capacity of 94cm3 with the crankshaft 48,00mm race. Specially designed and built for circuit competitions, runs ....

vue Pack BIDALOT RACING FACTORY 94cc (& label) 2014 pour mécaboite moteur minarelli am6

What he has been more compared to the old version of 94cc? In fact many changes were made ​​as the 6 transfers and exhaust to strip corrected and revised upwards. All adapted to the new 50mm bore diameter. These changes were well on a single goal, always optimize more power at high rpm while maintaining maximum torque and power at low and mid range.


cylindre Pack BIDALOT RACING FACTORY 94cc (& label) 2014 pour mécaboite moteur minarelli am6

Another addition to this high engine was brought directly into the design of the cylinder which is seen adding 4 fixing screws for the cylinder head stud. The cylinder is obviously still in aluminum with its specific treatment and coating nikasil. The cylinder head stud preserves its high compression combustion chamber and is accompanied by the famous blue head cover billet.


culasse Pack BIDALOT RACING FACTORY 94cc (& label) 2014 pour mécaboite moteur minarelli am6

Its piston racing is a top model mono segment special long race which will reduce friction and therefore increased high speeds. It has a new profile and is equipped with a ground-end chrome steel curved segment, its axis 13 X 40mm and reinforced clips. Delivered 100% complete, you will have full pack seals with different base gasket thicknesses allowing you to tweak your settings at the squish.


piston Pack BIDALOT RACING FACTORY 94cc (& label) 2014 pour mécaboite moteur minarelli am6

The crankshaft is the racing model race 48mm ultra strengthened. Obviously machined and perfectly balanced, dynamic balancing is specific, a rod cut in the mass polished, treated with titanium nitride: a unique process of its kind Its center distance is 95mm with a diameter Ø18mm crank pin, the cage has needle. connecting rod is silver treated to free needles with side antifriction washers blister bronze. A needle cage reinforced racing comes with the crankshaft to mount to perfection. In short, everything is upscale and quality racing in this pack.

vilebrequin Pack BIDALOT RACING FACTORY 94cc (& label) 2014 pour mécaboite moteur minarelli am6

A needle cage Ø13 X Ø17 X 17.5mm comes with all necessary hardware for assembly of this pack. A leaflet in French accompany you in the assembly with the recommendations of the brand BIDALOT for calibration and assembly of high engine as well as the specifics of the version of LABEL. This latest version (LABEL) is available with an average delay of another month. A hit and numbered version directly from the cylinder and delivered with a certificate of authenticity.

numéro label Pack BIDALOT RACING FACTORY 94cc (& label) 2014 pour mécaboite moteur minarelli am6

Why so long? For the simple reason is that the top engine is completely modified by the brand of running service. Preparations Account drop handmade and special machine at the foundry cylinders. This preparation for the craziest of you has a multitude of changes are:

-Changes Distribution-Changing heights and optimization scans angles (horizontal & vertical)
-modification Of the height and shape of the light / exhaust outlet
-Prepare The cylinder skirts
-Optimization The geometry of the "hollowed" of the exhaust strip
-Metrology And pairing cylinder / piston optimized
-Retouche Segment of beaks
-Check And the game Adjustment segment Cup
-Numérotation Of each cylinder for unique, genuine and verifiable preparations (to prevent copying and preparation dubious nickname Label ...).
-This Version of LABEL will go up with the Racing Factory 48,00mm rod crankshaft 95mm stroke.

Before adding to cart, be sure to select the desired version.

montage Pack BIDALOT RACING FACTORY 94cc (& label) 2014 pour mécaboite moteur minarelli am6

BIDALOT This pack contains:

Aluminum master cylinder diameter Ø50mm 6 transfers with big exhaust with bar
-Vilebrequin Long race 48mm / rod 95mm long in silks of Ø20mm
Blue aluminum cylinder head -Couvercle
Yoke -Plot
-piston Mono segment Ø50mm
-Segment Chrome steel Ø50mm X 0,8mm thick
Axis-piston internal external Ø13mm X 40mm X length Ø9mm
Piston -Clips Type C for axis Ø13mm X 1mm thick material
-Cage Needle internal external Ø13mm X Ø17mm X 17.5mm length
-X4 Studs reinforced M7 X 110mm length
-X4 Breech nut reinforced M7
Stud fastening -Visserie and head cover
-Cale Machined aluminum base 4mm thick
-X7 Breech ring seals
-X6 Aluminum base gaskets with different thicknesses
Mounting -Notice crankshaft race 48,00mm
Mounting the high engine -Notice
-certificate Authenticity of the cylinder (provides in the case of a label prepared cylinder BIDALOT)
-Autocollants

zoom montage Pack BIDALOT RACING FACTORY 94cc (& label) 2014 pour mécaboite moteur minarelli am6

We recommend to accompany this pack 94cc engine with top: a flexible mount for big carburetor carburetor carburetor Ø34mm, competition NGK R6252E105, exhaust Factory Racing 88 / 94cc specially designed to be assembled with the motor, ignition advance with Racing Factory variable internal rotor without lights, racing engine oil 100% synthetic ....

zoom Pack BIDALOT RACING FACTORY 94cc (& label) 2014 pour mécaboite moteur minarelli am6

This high engine fits the 50cc motorcycles following gearbox fitted the engine MINARELLI AM3, AM4, AM5, AM6 euro 1 am6 euro 2:

-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, attention to motor past DERBI euro 3)
-APRILIA RX engine AM6 (after 2006, attention to motor past DERBI euro 3)
-APRILIA MX engine AM6 (after 2006, attention to motor past DERBI euro 3)

-Beta CRE

RR -Beta
-Beta RR ALU

-Honda HM
-Honda CRE
-Honda BAJA

-HUSQUVARNA WXE
-HUSQUVARNA CH

-HM DERAPAGE
-HM CRE
-MALAGUTI DRAKON

-MALAGUTI XTM
-MALAGUTI XSM

-FANTIC CABALLERO

-PEUGEOT XP6
-PEUGEOT XPS
-PEUGEOT XP STREET
-PEUGEOT XP STREET EVO
-PEUGEOT XR6
-PEUGEOT XR7

-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX

-RIEJU RS1
RS2 -RIEJU
-RIEJU RS2 MATRIX
-RIEJU RS2 MATRIX PRO
SMX -RIEJU
-RIEJU MRX
-RIEJU SPIKE

-KEEWAY TX EN

-YAMAHA DT
-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER

SM -SHERCO
-SHERCO ENDURO
-SHERCO HRD
-SHERCO ENDURO

And many other machines!

  • Transferts a l'embase Gros transferts (travail des carters d'origine nécessaire)
  • Squish recommandé: 0,90mm
  • Refroidissement Liquide
  • Nombre de transferts d'admission 6 transferts
  • Nombre de segment Mono-segment (1 segment)
  • Matière Aluminium
  • Masses Pleines
  • Lumière d'échappement A barrette (2 parties)
  • Fixation: bride entre axe fixation 50mm
  • Equilibrage Oui
  • Diamètre (Ø): Ø49,999mm
  • Diagramme d'échappement: 195,00°
  • Diagramme d'admission (transferts latéraux): 134,00°
  • Diagramme d'admission (transferts arrières): 132,00°
  • Cylindrée: 94cc
  • Culasse: A plot (2 parties) hémisphérique
  • Course 48,00mm (longue)
  • Cage à aiguille: Ø13 X 17 X 17,5mm
  • Bielle 90,00mm (longue)

No customer comments for the moment.

Only registered users can post a new comment.

10 other products in the same category:

Search

Cart  

No products

Shipping 0,00 €
Total 0,00 €

Prices are tax included

Cart Check out

Categories

Pay with credit card

CMCIC3_payment

Manufacturers



Original design by Radius design modified by
By ChapodepaY