Banner
For more performance and a solid engine! This 70cc kit will be very good for equipping your scooter with a low horizontal Minarelli / Yamaha engine.
Not approved, prohibited on public roads, reserved for competition and closed circuits!
This 70cc MALOSSI MHR kit is a real concentrate of performance thanks to its design, its study, its architecture and the elements that accompany it. Its nicasil treated aluminum cylinder with specific heat treatment, has an excellent finish and is equipped with 6 enlarged and worked intake transfers with a huge bar exhaust.
The piston is a high quality single segment model in diameter Ø47.6mm favoring high speeds (reduction of friction), equipped with its fine convex lapped chrome segment, reinforced C clips and its 12mm axle. The piston has been created from the best materials to guarantee good resistance to heat and temperature changes with an external graphite coating for an even lower coefficient of friction.
Delivered 100% complete as presented with set of joints to make the squish, studs, accessories, screws, valve slats, single segment piston...
Cylinder head not supplied, available alone or with included in the kit (see in the spare parts at the bottom of the description).
We recommend accompanying this high engine with at least: Ø21mm carburetion, an intake kit, a racing exhaust, an ultra-reinforced crankshaft, C4 or Celeron reinforced bearings, racing cold spark plug, 100% synthetic racing engine oil, a variation large range, racing ignition, careful and follow-up running-in, proper assembly, etc.
As an option we offer a stage 1 preparation, this preparation is a modification of the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Mounts on:
2-stroke scooter minarelli horizontal liquid engine
2-stroke scooter minarelli horizontal engine air passed into liquid (long only)
APRILIA AREA 51 LC
APRILIA GULLIVER 50
APRILIA SR NETSCAPER 50 LC
APRILIA RALLY 50 LC
APRILIA SR RACING 50 LC
APRILIA SONIC LC
APRILIA SR REPLICA LC
APRILIA SR STEALTH
BENELLI 491 SPORT LC
BENELLI K2 50 LC
BETA ARK 50 LC
BETA EIKON 50 LC
GARELLI GSP 50 LC
ITALJET DREAGSTER 50 LC
MALAGUTI F15 FIREFOX 50 LC
MALAGUTI F12 DIGIT KAT LC
MALAGUTI F12 PHATOM LC
MALAGUTI F12 R LC
MBK MACH G 50 LC
MBK NITRO 50 LC
YAMAHA AEROX 50 LC
YAMAHA JOGRR 50 LC
Reference: 6611785B
High quality needle cage, reinforced! ideal on the most advanced configurations.
Reference: 27 7054.K0
Ideal for fine-tuning your settings and improving your performance!
Reference: 36 4450
Do not forget to change at each winding to prevent engine failure thereafter.
Reference: 1012877
Ideal for plugging carburettor air intakes or cylinder head.
Reference: 11 8287C
Pack a few seals available !!!
Reference: 34 8654.A0
A spare piston high-end treatment with graphite, several sizes available!
Reference: 19 3298E
Set of 2 M6 studs which can be used for many applications.
Reference: 2311783B
Piston pin with shaped clips "C", essential for refurbishment quality and reliable.
Reference: 31 8460
For more performance and a strong engine! This 70cc will be very good to equip your scooter with low Minarelli / Yamaha engine horizontal.
Reference: 06 8187
Pack a few seals available !!!
Reference: 38 8467
Ideal replacement cylinder head in case of wear, breakage ... of your old part!
Reference: 3112642
A high-performance ultra complete engine thanks to its increased displacement and 7 large intake transfers.
Reference: 072400
A wonderful kit that announces high performance while maintaining high strength.
Reference: 31 8284
A torquey and very solid kit. Ideal for everyday use.
Reference: 3113262
A very good compromise between strength and power!
Reference: 31 8460
For more performance and a strong engine! This 70cc will be very good to equip your scooter with low Minarelli / Yamaha engine horizontal.
Reference: 9912800
The famous TOP PERFORMANCES ROSE diameter 47mm solid and efficient.
Reference: EQ-995-S
The famous 47mm (70cc) aluminum BARIKIT Racing! A powerful cylinder accompanied by a good engine configuration. 50cc motorcycle engine with liquid scooter minarelli (nitro, aerox ...).
Reference: 010713476
The cheapest aluminum cylinders, made in spain, AIRSAL is good and offers good performance at a reduced price.
Reference: P400485100044
The must of all ATHENA kits with a bolted cylinder head for better gas explosion and better engine cooling.
Reference: EQ-785
High performance version from BARIKIT, recognizable by its white cylinder head.
Reference: 3115901
Maximum performance, only for liquid-cooled scooters (7 transfers and exhaust bar - single segment piston - decomposable cylinder head!
Reference: 010726476
A very good price / quality, performance and torque! Luxury model.
Reference: 9929340
Top upon compression, SIMONINI kit for the long stroke crankshaft 44mm on minarelli horizontal liquid (nitro scooter, aerox and many others).
Reference: H01073947
A kit much stronger than the aluminum AIRSAL and very torquey. A perfect kit to ride every day and over long distance without fear of a heater or primer.
Reference: 01073450
A high ultra racing engine, very powerful all this at a price never seen for such quality.
Reference: 30.431/M3
A high-performance engine, powerful and very solid in SIMONINI. A real monster with 6 transfers of admission, exhaust and boost VERTEX piston mono segment.
For more performance and a solid engine! This 70cc kit will be very good for equipping your scooter with a low horizontal Minarelli / Yamaha engine.
