• Banner

Kit 75cc Ø48mm POLINI Reproduction seria 6000 alluminio per minarelli P6 aria
  • Kit 75cc Ø48mm POLINI Reproduction seria 6000 alluminio per minarelli P6 aria

Kit 75cc Ø48mm POLINI Reproduction series 6000 aluminum for minarelli P4 and P6

133.6005

The kit POLINI SERIE 6000 reproduced for the passionate ones! For 42mm stroke.

Stage 1 engine preparation
€433.33
Quantity
Shipping in 1-3 days

Description

The passionate have dreamed, POLINI did it, the famous kit POLINI SERIE 6000 rebuilt for your old engines MINARELLI. This kit is really complete, it has a 29.5mm inner diameter outer tube and 32.20mm outer tube.

pot, échappement, tube, kit, polini, 6000, gitane, testi, minarelli, p4, p6, 75cc

From an intake pipe with its flexible sleeve internal diameter 19mm, external diameter for 24mm rigid carburetor, and 35mm diameter of the flexible sleeve internally for the soft carburettors, if you put a soft carburettor with this sleeve, you will cut the intake pipe at the entrance, its diameter will then be around 25mm.

kit polini serie 6000 P4 P6 admission pipe carburateur puissance

It is ideal for the installation of a POLINI 25mm, DELLORTO PHBH, PHBL, VHST ... The cylinder is made of high quality aluminum with nikasil coating, it has 2 rear transfers which are also used for filling the low engine that will come subsequently fed the lateral ones.

kit polini cylindre piston culasse haut moteur 6000 75cc P4 P6 minarerlli testi

So in the end a real 4 transfers because the 2 back does not come into action for the PISTON scan unlike AM6, DERBI ... The exhaust is a big oval. The casing inlet skirt diameter is Ø54mm, so a 54.2mm bored housing is required. Between pins of 48X48mm studs.

diagrammes lumières kit polini serie 6000 minarelli p4 p6

This kit comes with a set of reinforced studs for a good clean assembly and can tighten your thermal group to 2.04mk / g. The piston is a model with high silicon content, with L-shaped segment. The cylinder head delivered has a highly worked, hemispherical combustion chamber, with a micro-blasted finish. It has a reinforcement bar in the mold to prevent warping.

culasse chambre combution rapport compression kit polini 6000 p4 p6 minarelli

In view of the quality of the aluminum, do not be afraid to cool, this cylinder will not exceed the temperature required for performance! It will offer you a lot of torque and power by starting again with your good old minarelli P4 or P6. It is really a beautiful set that came out POLINI, in limited series!

admission carburateur phbg phbh phbl minarelli p4 p6 polini

 

Summary :

For MINARELLI P4 and P6 engines

Compression ratio: 13.8: 1 (use of SP98 obligatorily)

For race: 42mm

Actual cylinder capacity: 76,00cc

Diameter of skirt Ø54mm, bore perfect housing 54,2mm

Transfers: 2 rear for low engine filling, 4 actual side.

Exhaust: Standard oval.

Piston: mono-segment, with segment type L

Cylinder head: high compression microscopic hemispherical chamber

Inlet pipe: For 19mm rigid or 25mm flexible (+ if preparation pipe)

Inter-axis studs 48X48mm

Exhaust pipe delivered internal Ø29,5mm and external 32,2mm

Power announced: 13.6 hp at 9800 rpm

Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!

Product Details
133.6005
12 Items
New product

Specific References

ean13
8054705010576
Attachments
Download
Notice kit POLINI P4 P6

Assembly, maintenance and information instructions for the POLINI S6000 kit for P4, P6...

Download (0)
You might also like
16 other products in the same category: