Reference: 020306435
Cylinder - piston without cylinder head 65cc Ø43,5mm AIRSAL aluminum for engine MORINI M1, M101, M1ES 50, M1K
Very good little aluminum kit for MORINI M1 engine, M101, M1ES, M1K ... 50 2T!
Banner
Ideal to start afresh with a complete engine but without cualsse coupleux and powerful on your ZUNDAPP as the CS50, KS50 ... Air cooling, admission with valves, big model otherwise called in Italian SUPERTERM LAMELLARE! Here is the kit Ø45mm, 70cc, without its cylinder head, its piston vertex mono-segment, 4 transfers with the admission, cylinder in aluminum, it is even delivered with its pipe of the choices for carburettor DELLORTO (24mm PHBG RIGID fixation and internal 20mm) or BING (fixing 26mm, internal 20mm too).
You can accompany the PARMAKIT RACING cylinder head or original cualsse!
Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!
Reference: 020306435
Very good little aluminum kit for MORINI M1 engine, M101, M1ES, M1K ... 50 2T!
Reference: 020000/1
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 53495.00
The latest parmakit for 44mm travel on the MINARELLI P6 engine. Delivered with its cylinder head, exhaust fixing with 3 screws (radial system).
Reference: 53488.00
A high performance high-end motor special race 44mm for Minarelli P6! Fixing the exhaust with 3 screws, for RADIAL SYSTEM.
Reference: 073800
The most powerful kit on the market for SACHS has cylinder head connected to the cylinder! Full version with clamshells!
Reference: 26105.00
Very torquey, robust and powerful kit for FLANDRIA 50cc 2T.
Reference: 64450.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 14mm with 4 transfers with a short stroke crankshaft.
Reference: 42320.00
A complete high-performance high-end engine special for KREIDLER RS SPORT 50.
Reference: 64430.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 25104.00
PARMAKIT 80cc special kit for old FANTIC CABALLERO. 48X48mm studs.
Reference: 64266.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 4 transfers with a long stroke crankshaft.
Reference: 85206.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling as the CS50, KS50 ...
Reference: 85306.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling for miniterm engines.
Reference: 64263.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 2 transfers with a long stroke crankshaft.
Reference: 168.6006
The POLINI SERIE 6000 kit reproduced for enthusiasts! For 41.6mm stroke.
Reference: 010500/1
A whole 100% complete, in ATHENA 60cc 42mm diameter. Rare coins, very few are still on sale. MINARELLI P4, P4R, P6, TESTI, MOTRON ... Out of production!