Reference: 009512
ATHENA Racing competition valves minarelli am6
High quality competition valves, bonded aluminum base!
Banner
High quality 80cc ATHENA kit. Ø 48mm big bore, it consists of a high-end nicasil treated aluminum cylinder from EUROCILINDRO.
From an ASSO piston with high silicon content, flat cap with single L-segment.
This excellent set is given with a valve box adhered to the viton with two double slats joined in karbonit fiber, you can mount them with or without slat stops.
Intake plates, muffler ball joint ...
This complete high performance set is obviously very torquey and robust, ideal for refurbishing your old MORINI 2T 50.
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Mounts on old MORINI engines :
Franco Morini 2T G30 - Motorcycles-mopeds
MORINI S5 / GS
KTM SX 50
Malaguti FIFTY FULL CX 50 - 1991/1991 - Motorcycles-mopeds
Moto Gac WINNER 50 - Motorcycles-mopeds
LEM 50
Reference: 009512
High quality competition valves, bonded aluminum base!
Reference: S410000304002
The ATHENA clips of good quality for 12mm axles with 1mm diameter piston groove!
Reference: 001716/R
High-end segment to refurbish and increase your engine compression.
Reference: 021725
The flange has 2 screws for fixing the muffler in Ø29mm ATHENA for P4, P6 ...
Reference: 003803
Pack of complete seal for kit 80cc ATHENA air on MORINI T4, GS, TUNTURI, ZENELLA, PERIPOLI ...
Reference: 073600
80cc kit with inclined admission, more practical for certain carburetion assemblies!
Reference: 168.6006
The POLINI SERIE 6000 kit reproduced for enthusiasts! For 41.6mm stroke.
Reference: 64262.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 4 transfers crankshaft long race.
Reference: 53495.00
The latest parmakit for 44mm travel on the MINARELLI P6 engine. Delivered with its cylinder head, exhaust fixing with 3 screws (radial system).
Reference: 85105.00
Kit offering a great increase in torque and power to your ZUNDAPP 603 engine.
Reference: 063600
ZUNDAPP is very robust and powerful!
Reference: 53498.00
The very last parmakit for 42mm stroke on MINARELLI P6 engine.
Reference: 021700
The cylinder kit, piston, cylinder head, Ø48mm ATHENA for P4R, MACAL, MALAGUTI FIFTY ....
Reference: 64450.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 14mm with 4 transfers with a short stroke crankshaft.
Reference: 64432.00
A complete high-performance high-end engine special for SACHS 503 and 504 with a 14mm axle with 2 transfers with a long stroke crankshaft.
Reference: 42320.00
A complete high-performance high-end engine special for KREIDLER RS SPORT 50.
Reference: 003100
Very torquey, robust and powerful kit for ZUNDAPP!
Reference: 30132.00
Kit very torquey, robust and powerful for GUZZI DINGO SPORT 50cc 2T.
Reference: 85215.00
The high engine complete with cylinder head, 70cc, for ZUNDAPP air cooling, big model flaps!
Reference: 25104.00
PARMAKIT 80cc special kit for old FANTIC CABALLERO. 48X48mm studs.
Reference: 020000
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.