Reference: 85207.00
Kit 70cc Ø45mm PARMAKIT for ZUNDAPP SUPERTERM, CS50, KS50 ...
The complete kit 70cc for ZUNDAPP with its cylinder head!
Banner
A complete set of rare and high-performance parts for the old SACHS RS long-stroke 503 and 504 motorbikes. This high-quality aluminum cylinder comes straight out of Made in Italy molds! It has 2 large intake transfers with a lubrication system internal to the cylinder and in accordance with its piston. The architecture and finish are of course excellent and upscale. A huge bar exhaust and high diagrams make this power unit a powerful asset for your 2 wheeler! The piston which accompanies this cylinder is a mono-segment model from VERTEX therefore of high quality. With its L-shaped segments it will offer you torque. It is also delivered with its overcompressed cylinder head which will allow you to make the best use of your engine all by starting from scratch. Clearly, an excellent quality / price / performance ratio to bring your SACHS back to life.
We recommend accompanying this kit with at least 17mm carburetion, cold racing spark plug, 100% synthetic racing engine oil, reinforced bearings and crankshaft, racing exhaust ....
This pack contains:
-Aluminum cylinder 2 transfers with bar exhaust
-Piston VERTEX mono-segment
-2 L segments Ø45mm X 1mm chromed steel
-Piston axis Ø14
-G piston clips
-Pack of engine gaskets
-Notice
-Sticker
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: 85207.00
The complete kit 70cc for ZUNDAPP with its cylinder head!
Reference: 021700
The cylinder kit, piston, cylinder head, Ø48mm ATHENA for P4R, MACAL, MALAGUTI FIFTY ....
Reference: 003800/1
Very high quality 80cc kit, complete with valves and pipe for period MORINI engines!
Reference: 85120.00
The only kit available on the market for ZUNDAPP liquid cooling SUPER 50 LC, KS50LC ...!
Reference: 64430.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 020000/1
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 85306.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling for miniterm engines.
Reference: 25104.00
PARMAKIT 80cc special kit for old FANTIC CABALLERO. 48X48mm studs.
Reference: 074000/1
Very good 70cc kit for SACHS integrated cylinder head! Available with or without intake pipe.
Reference: 148.6002
The POLINI 6000 series kit reproduced for enthusiasts! For 44mm stroke. Have
Reference: 168.6006
The POLINI SERIE 6000 kit reproduced for enthusiasts! For 41.6mm stroke.
Reference: 64266.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 4 transfers with a long stroke crankshaft.
Reference: 64450.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 14mm with 4 transfers with a short stroke crankshaft.
Reference: 42115.00
Very torquey, robust and powerful kit for KREIDLER FLORET HP 4,8.
Reference: 85206.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling as the CS50, KS50 ...
Reference: 42105.00
Kit very torquey, robust and powerful for KREIDLER FLORET HP 5.2.