Reference: 229.0615/GT
Piston FURYTECH RS10 GT Ø40.3mm for kits 50cc on minarelli am6
Ideal for loss of compression or just for a refurbishment.
Banner
Already available from us, here is the latest kit from FURYTECH named RS10 GT. This 50cc kit is reserved for demanding users who want a high performance engine, staying in the legal 50cc capacity and preserving strength and torque!
The least we can say is that FURYTECH worked hard, they put a new stronger piston with 0.8mm thick segments rounded off to minimize the friction, 2 in number segment) to preserve torque and strength.The cylinder is aluminum with a very high-end nikasil treatment, the finish is excellent, for more performance, they opted for a booster exhaust (in 3 parts), the exhaust duct is obviously properly round and unbridled, 5 admission transfers are present to provide a better sweep and better feed the race.
You will not need to align the engine crankcases to the cylinder. Same level head evolution is very present, the cylinder head is at stud with polished hemispherical room giving it a good cooling. T stud is to maintain aligned entering the room to the cylinder. The cylinder head cover is also very well studied and has an excellent keeps! the cylinder also comes with 3 joints of base plate to make the squish.
To summarize, this cylinder has more diagrams in-between, which allows you the power while preserving the torque, with its bi segment ends identical it allows on the one hand high speeds with less friction but preserves of the couple, this cylinder is really a nice compromise that proves once again that FURYTECH = SERIOUS BRAND & EVOLUTION.
We recommend with this thermal group RS10 GT: racing exhaust, carburetion in Ø19 to 21mm with racing valves, cold racing spark plug, reinforced crankshaft, transfer aligned to the crankcase if desired.
The pack consists of:
-Piston bi-segment
-2 thin segments 0.8mm
-Axe of 12mm
-2 crab type piston clips
Aluminum cylinder 6 transfers of intake exhaust with boosters
-3 base seals
-Othouseal head gasket
-Muffle gasket
-Visserie
-Covet cylinder head
-Plot of breech
-Notice
In option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!
Reference: 229.0615/GT
Ideal for loss of compression or just for a refurbishment.
Reference: 329.0615/GT
A very complete joint pouch of high quality at low cost, ideal for winding without leaking.
Reference: 429.0615/GT
Here is the alternative segment of game for your high RS10 engines FURYTECH GT two-segment motor AM6!
Reference: 013006476
The deluxe version of 50cc AIRSAL bi-segment, a powerful kit, strong, torquey and especially with an attractive price, very good engine preparation base.
Reference: 482036
The 50cc kit type origin the cheapest on the market with a quality and a correct finish.
Reference: 11000168
An excellent 50cc kit, very powerful and very robust, ideal for competition as for the road!
Reference: P400130100004
A kit that allows you to have torque at all speeds.
Reference: 479130
A kit with diagrams higher than the original with a cylinder head overcompréssée for a considerable performance gain while maintaining a very good strength.
Reference: 011313403
The AIRSAL 50cc SPORT is ideal for riding every day, a performance gain is made for a great price on your am6 engines.
Reference: EQ-922-S
High complete engine ideal for respecting the 50cc displacement and circulating every day with an efficient kit 5 transfers, bar exhaust, high compression cylinder head with incoming stud, mono segment piston ...
Reference: 504640
Cylinder - piston without cylinder head DOPPLER cast iron 50cc for minarelli am6.
Reference: CK.44.492.G2
A very powerful kit with a specific admission has 6 lateral transfers and a stud bolt! Performance level! To put with the POLINI and MALOSSI!
Reference: 11000042
A powerful kit to install with a crankcase alignment and a good configuration low engine, exhaust and carburetion!
Reference: 3112381
A high-performance kit reserved for competition in 50cc, diagrams very worked with a very studied architecture!
Reference: 030310
One of the cheapest on the market, ideal for repairing a high engine original whose breech is not damaged!
Reference: CIL-788
Cylinder / piston without cylinder head ideal for meeting the 50cc engine and circulate daily. 7 transfers, extended oval exhaust, dual piston segments .... To accompany a cylinder head high compression BARIKIT.
Reference: H011381403
A kit a bit more powerful than the original while maintaining excellent reliability for a completely ridiculous price.
Reference: IM1
New range of MVT cylinders for your MINARELLI AM6 engine!
Reference: 032065
Here is a top engine of very good quality much cheaper than the origin which offers better heat dissipation, less friction...