Reference: HM40
50cc liquid aluminum kit with MVT COMPETITION G3 cylinder head (103, 51, OPEN, G3...)
Top competition engine G3 MVT .
Banner
After numerous requests, we are marketing BARIKIT parts for MBK 51. Here is the one and only BARKIT cylinder for MBK 51 engine, Motobecane av10, this model is a small replacement kit. The cylinder is an AIRSAL T4 base, so it has 2 lateral transfers and 2 rear transfers, the nykasil is very good, aluminum too.
The piston is a BARIKIT model, it has a rear half moon to improve scanning. This cylinder with slightly higher diagrams than the original, it offers some additional performance. The finish is quite good and the channels well formed! We regret that the kit is delivered without seals! Remember to buy a separate head gasket, a manifold and exhaust gasket.
We recommend accompanying this kit with : high engine seal pack, apart from that, no parts are necessary to properly operate this thermal group.
The pack contains :
X2 segments
X1 piston
X2 piston clips
X1 T4 aluminum cylinder
X1 piston pin
Spare parts :
Complete piston
Segments
Attention the piston with the half moon is no longer delivered with this kit!
Optionally we offer a stage 1 preparation, this preparation is a modification of the exhaust light by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement in the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: HM40
Top competition engine G3 MVT .
Reference: 4107
Ideal for an original type refurbishment at a low price.
Reference: 032101
A kit almost identical to the origin but at half the price. One way to get your AV10 back up and running without spending too much.
Reference: 138932
Very good quality 50cc kit, ideal to start afresh with more performance!
Reference: 134.0302
Now out of production!
Reference: 170880
Very good quality 50cc kit, ideal to start afresh with more performance!
Reference: 265696
A very good quality aluminum kit with 6 transfers to have a good performance gain at a low price.
Reference: 158748
A kit almost identical to the origin but at half the price. One way to get your AV10 back up and running without spending too much.
Reference: 31 6864
The real G1 replica kit for MBK 51, aluminum oval exhaust, intake 6 transfers, great ration torque / power in charts! High quality manufacturing.
Reference: 063000
Out of production!
Reference: 11000313
Out of production.
Reference: 812
A kit almost identical to the origin but at half the price. One way to get your AV10 back up and running without spending too much.
Reference: 480961
A very good quality aluminum kit with 3 transfers to have a slight performance gain at a low price.
Reference: 502015
A good quality cylinder sold without gasket or cylinder head.
Reference: 11000213
Out of production.
Reference: 197252
A good mono segment kit very well known and very well known for av10 engines.