Reference: 247751
Valves DOPPLER ER2 for MBK 51 / MOTOBECANE AV10
A well worked room for a considerable performance boost on your MBK.
Banner
Ideal for mounting your flexible carburetors from 17 to 21mm, it is extremely short and well ventilated / studied. It has a machining (label type) to put a flexible sleeve, the latter is also delivered with this pipe, as well as the 2 clamps, you can install your carburettors from 17 to 21mm flexible mounting (fixing diameter on the sleeve from 21 to 25mm).
The DOPPLER logos are inscribed on each side of the pipe, remember that the flexible assemblies avoid the emulsion of gases, vibrations and jolts in the carburetor, these assemblies therefore improve performance!
The ideal tightened to mount it with MALOSSI VL2 valves and to align the pipe at the inlet of the valves, while breaking the inlet angles of the front valves. This pipe is delivered quite raw, to be reworked if possible! Ideal for preparers.
Reference: 247751
A well worked room for a considerable performance boost on your MBK.
Reference: 293370
A quality sleeve that absorbs vibrations very well for better gas flow.
Reference: 02 5035B
The best to repair or modify the size of your MALOSSI valve boxes on your PEUGEOT 103 or MBK 51.
Reference: 1411
At a good price and ideal to accompany a 17.5 to 20 mm PHBG carburetor on your MBK 51.
Reference: 02 6704
A pipe especially for MALOSSI G2 housing but few also be mounted on DERBI EURO 1, 2 and 3. It was created to mount your 24mm carburetors (RIGID PHBG or with flexible sleeve for passage).
Reference: 215.0242
Top model ideal for mounting a carburetor SHA 15 or 16mm on your MBK 51.
Reference: 13800213
The intake pipe pack + valves G1 / G2 BIDALOT!
Reference: 215.0245
High-end POLINI 15mm diameter valve box for MBK 51.
Reference: 1408
At a good price and ideal to accompany a 14 to 16mm SHA carburetor on your MBK 51.
Reference: 1415
A pipe with a correct finish that will go very well with a carburetor 14 to 16mm in SHA.
Reference: pack_pipe_malossi_AM6_DERBI_90°
MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI
Reference: 1314916B
Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 1414
A pipe created for 17 to 19mm carburetors in flexible or rigid PHBG. The finish is not great but it will still be a very good base.
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 51305.05
For performance and strong motor! Accompanied with a rigid SHA carburetor 15 to 16mm.
Reference: 02 2962B
A fairly short pipe for maximum performance. It is mounted with a 15mm carburetor. In a very clear well studied and finished pipe for a good earning power of your engine.
Reference: 159643
At a good price and ideal to accompany a 15 mm PHBG and SHA 14-15-16 carburettor on your MBK 51.