Reference: 215.0427
POLINI Evolution directional intake pipe 15 to 21mm carburetor (Ø23 to 25mm fixing) mécaboite driving DERBI and AM6
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Banner
Here is the latest POLINI Evolution adjustable swivel pipe for mécaboite driving DERBI euro 1, 2 & 3! This pipe is really at the top, first you orient it as you wish to place the carburetor as you want! Its position is planned for the big carburettors POLINI CP and its internal diameter also (28,5mm, for carburettor of 23 and 24mm).
Its fixing diameter is from Ø23 to 25mm. To avoid vibrations and harmful jolts, the sleeve is in specific viton. Rigid enough for the pipe to crack and not break when tightening. Even aesthetic side we feel that POLINI has really cared for this room to the maximum. No need to put a seal, a seal is pre integrated to the junction, moreover it is delivered with instructions, screws ... Clearly, thanks to a perfect diffusion, a absorption of the vibrations, a good position ... The gain of performance will be well present!
-For POLINI carburettors CP 23 and 24.
-Internal diameter 28.5mm.
-Diameter fixing 23 to 25mm.
-Tilt angle 30 °.
-Original 360 °.
-Special for mécaboite DERBI.
A = Ø28.5mm
B = 23 -> 25
C = 30 °
Reference: 215.0427
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 494635
Optimize the performance of your mécaboite!
Reference: 140619
An original type intake pipe, good quality and less expensive than the original in concession.
Reference: CL02
A model of competition that you will greatly improve the performance of your DERBI.
Reference: 1772
A very well finished pipe that will absorb vibrations and all this at a low price. In addition to this, you need to know more about it.
Reference: 23207.05
Carburetor 18 to 21mm flexible mounting, fixing d.19 X 24mm.
Reference: 2013800
The high-end and ultra-efficient Viton version!
Reference: 215.0455
Ideal for equipping a large, precise and efficient engine configuration! 360° swivel with 20° tilt angle.
Reference: 10871
A very well finished pipe that will absorb vibrations and all this at a low price. For 24mm to 34mm PWK carburettors!
Reference: 487209
A good quality pipe with an almost perfect finish for a price more than affordable!
Reference: 9929240
Replacement for TPR orientable intake pipes with MIKUNI TM 24 and OKO 28 carburettor on mécaboite Minarelli AM6 and DERBI.
Reference: 467800
A good quality intake pipe which allows you to position your carburetor as you wish.
Reference: 215.0463
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 9931740
TPR intake kit, 360 ° swivel, flexible assembly specially designed to accompany an OKO, PWK POLINI, FURYTECH, KEIHIN ... 24 to 28mm carburetor on AM6 & DERBI Ø34mm mounting.
Reference: 2013801
A very high-end special for large carburations on MINARELLI AM6, DERBI ...
Reference: 25527
Pipe of admission with rigid and flexible venturi sleeve, excellent quality, good price!