Banner
A reinforced version, full masses for minarelli am6 with bearings Ø20mm big litter.
Here the highest crankshaft end home BARIKIT (just under the BRK) for motorcycle engine 50cc minarelli am6. This model is cut in good steels, it has a polished finish reinforced rod based on a plus pin. Unlike the SPORT model, vilo has a real job on lubrication but also on balancing and real solid masses, with internal dynamics and external machining, so it provides a performance gain. 
It goes very well with your 50cc or 70cc kits small and great power. This vilo with her weight has an excellent inertia. Delivered with its cage needle has treated Ø12X16X16mm money. This silk version (carried bearings) of Ø20mm allow better reinforcement of driving bottom, reduce the bearing friction, play, vibration ... so you need to ask a set of 2 Special size bearings Ø20mm X 40mm X 14mm, the BIDALOT, BRK, MALOSSI or other minarelli size models scooter / DERBI. Clearly, an excellent price / quality ratio plus a very clean finish. 
Cage spare needle
summary:
Course: 39mm as the origin
Reinforced: yes
Masses: full
Cage has needle: Ø12X16X16mm plus
Yes and dynamic balancing
Rod: reinforced size origin 85mm
Pin: Ø20mm
Lubrication: reviewed and corrected 
Fits the 50cc motorcycles gearbox equipped minarelli am3, am4, am5, am6 euro 1 am6 euro 2:
Aprilia RS 50cc am6 from 1997 to 2006 (new attention after 2006 engine derbi euro 3)
Aprilia RX am6 engine (new attention after 2006 engine derbi euro 3)
Am6 APRILIA MX engine (new attention after 2006 engine derbi euro 3)
Aprilia Tuono 1997 am6 50cc engine 2006 (new attention after 2006 engine derbi euro 3)
BETA RR
BETA RR ALU
BETA CRE
HM HONDA
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
Peugeot XPS
MOTORHISPANIA RYZ
Peugeot XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
Peugeot XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIAJU RS1
RS2 RIEJU
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
SMX RIEJU
RIEJU MRX
RIEJU SPIKE
KEEWAY TX EN
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO
CPI SM
And many other machines!
Reference: IM07062
An original crankshaft with bearings and spy perfectly adapted to be assembled together, reinforced model which will easily support an original type configuration up to the small 70cc kit.
Reference: 367223
One of the best quality, price and performance ratios on the market.
Reference: 150838
The most performance crankshaft from ARTEK which can go up to 20,000 revolutions!
Reference: 80038
An excellent crankshaft, made in Italy, finishing and impeccable balancing!
Reference: 518745
The ultra-reinforced full-mass CHR crankshaft. Forged / ground connecting rod with heat treatment!
Reference: CB.44.8
A horse race between normal and long, wedge assembly without machining or on your small gain am6 and engine capacity (+ 1mm travel).
Reference: CIG-133R
A reinforced crankshaft for a low solid engine, ideal to accompany a prepared configuration! Stroke slightly increased to 40.7mm!
Reference: CB.44.91
A crankshaft of high quality with a casting rod, delivered with its bearings celeron big litter !!!
Reference: 31134950
A good reinforced crankshaft that mounts to virtually any configuration for an unbeatable price.
Reference: 075414
A very high quality crankshaft, in large bristles, full masses delivered with its bearings for am6 engine!
Reference: 419
A very good quality mid-range crankshaft designed to go up to 14,000 rpm!
Reference: CIG-78R
A reinforced crankshaft for a low engine sound, ideal to accompany a prepared configuration!
Reference: 5312280
A very high quality crankshaft, dynamic balancing, cut from the best steels, all the know-how of MALOSSI MHR for your am6 engines!
Reference: 090936B
An ultra reinforced and perfectly balanced crankshaft for AM6. Ideal for large setups.
Reference: 451390
A very good crankshaft at low prices which will support 50cc kits like 80cc.
Reference: CB.44.91R
The ULTIMATE vilo for am6, gorsses worn 20mm, celerons bearings, forged rod machined mass, excellent balancing, .... The best of the best !!!
A reinforced version, full masses for minarelli am6 with bearings Ø20mm big litter.
