Reference: JP04
Needle cage BARIKIT reinforced Ø12X16X16mm minarelli am6, 103, DERBI, PIAGGIO ...
Reinforced needle cage, mounts on many models of crankshaft and engines!
Banner
Here is the most upscale crankshaft from BARIKIT for 50cc MINARELLI AM6 motorcycle engine. This model is the BRK 4 RACE for FOR RACE, for racing, cut in the best steels, it has a reinforced polished finish rod which rests on an increased crank pin, anti-friction wedges with silver cage to support the highest speeds .
Attention, stroke version 40.7mm increased + 1.7mm. Allows the increase in displacement, diagrams and compression ratio, to be installed with a shim or a seal of around 0.8mm in addition to the base base seal !!
Unlike the competition model (just below), this vilo has a real work on the lubrication but also on the balancing and real full masses, it therefore offers a performance gain and a real reinforcement of the low engine. It will be perfect to accompany 50cc or 70cc medium and high power kits.
This vilo with its weight has excellent inertia and a very good finish with a nice aesthetic. Delivered with its needle cage Ø12mm X Ø16mm X L.16mm. This version in bristles (bearing seats) with a diameter of Ø17mm is to be mounted with bearings of the original size reinforced Ø17mm X Ø40mm X L.14mm. An unbeatable value for money!
Detailed features:
-Dynamic balancing: yes
- Pin Ø18mm
- Stroke: 40.70mm (increased + 1.7mm)
-For powerful 50cc and 70cc kit
-Soies of: Ø17mm as the origin
-Reinforced connecting rod size 85mm like the origin
- Needle cage: Ø12mm X Ø16mm by L.16mm
-Masses: full sizes Ø76mm
- Keying: yes
Reference: JP04
Reinforced needle cage, mounts on many models of crankshaft and engines!
Reference: CB.44.8
A horse race between normal and long, wedge assembly without machining or on your small gain am6 and engine capacity (+ 1mm travel).
Reference: 210.0052
The new version of the crankshaft POLINI EVO for minarelli am6!
Reference: CIG-130R
A reinforced crankshaft for a solid low engine, ideal to accompany a prepared configuration!
Reference: 090935A
A crankshaft, solid, reinforced and of very good quality for a small price.
Reference: CIG-42
A reinforced version, full masses for minarelli am6 with bearings Ø20mm big litter.
Reference: 264006
The DOPPLER ER1 is the best value for money on the market, this model is reinforced and well balanced.
Reference: VI01
A very well balanced reinforced crankshaft that will support the largest configuration on the market.
Reference: CB.44.91R
The ULTIMATE vilo for am6, gorsses worn 20mm, celerons bearings, forged rod machined mass, excellent balancing, .... The best of the best !!!
Reference: 150838
The most performance crankshaft from ARTEK which can go up to 20,000 revolutions!
Reference: IM07017
Original type crankshaft and superior quality. Reinforced, solid and resistant model.
Reference: 367223
One of the best quality, price and performance ratios on the market.
Reference: CIG-29
A reinforced version in solid masses for minarelli am6 with normal size bearings!
Reference: 53401.14
From the top of the range race origin 39.00mm for mécaboite engine Minarelli AM6!
Reference: 5312280
A very high quality crankshaft, dynamic balancing, cut from the best steels, all the know-how of MALOSSI MHR for your am6 engines!
Reference: S410130320001
A good crankshaft reinforced and in full masses for your minarelli am6 with bearings of origin size.
Reference: 31134950
A good reinforced crankshaft that mounts to virtually any configuration for an unbeatable price.